Xantech RP41AV IR Remote Controlled A/V Preamp

Xantech RP41AV IR Remote Controlled A/V Preamp

Provide all the Functions Needed for a Multi Room System with an IR Remote
  • Four separate line level A/V inputs
  • Separate Volume (Up/Down), Balance (Left/Right), Bass and Treble controls feature continuous adjustment in 2 dB steps, in either direction, all IR controlled
  • Comes complete with power supply
  • Requires RC68+ Programmer for IR control

Item #: 81335 Product is Unavailable

  • Details
  • Specs
  • Reviews
  • What's Included
  • The Xantech RP41AV IR Remote Controlled A/V Preamp is a fully functional infrared remote controlled audio/video preamp. Volume, Bass, Treble, Balance and Mute functions, in addition to A/V input switching, provide all the functions needed for multi-room systems. It features a low noise, low distortion design with high headroom capability, for highest audio and baseband video performance. The Preamp requires a RC68+ Programmer for IR control (sold separately). The RC68+ is the source of all the IR commands necessary to operate the Preamp. Normally the user would "teach" these commands into a Xantech Learning Remote, Key Pad or other learning device.

    • Gain (@ max VC): Unity
    • Input Overload: 4.5 V RMS (@ max VC)
    • Input Impedance: > 40 k Ohms (ea. input)
    • Output Impedance: 470 Ohms (allows output to be paralleled for mono, if needed)
    • Volume Attenuation: -80 dB
    • Signal to Noise: 100 dB (re 2V out)
    • THD: (VC -10 dB) 0.01% at 2.0 V input level
    • Channel Separation: > 75 dB @ 1 kHz
    • Freq. Response: 20Hz-20kHz +/- 1 dB
    • Bass Range: +/- 12 dB (in 2 dB steps)
    • Treble Range: +/- 12 dB (in 2 dB steps)
    • Video IN/OUT Impedance: 75 Ohms.
    • Video Insertion Loss: 50 Hz - 10 mHz < 1 dB.
    • Video Out-IN Isolation: 50 Hz - 10 mHz > 55 dB.
    • A/V Inputs/Outputs: RCA type phono jacks
    • IR Code Group: 40 (factory preset)
    • Power Requirements: 15 VAC @ 300 mA.
    • Power and IR Inputs: 4-terminal screw terminal plug-in connector
    • Dimensions: 10" W x 3" D x 1 3/8" H (254mm x 73mm x 35mm)
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - IR Remote Controlled A/V Preamp
    • 1x - Power Supply
    • 1x - Owner's manual

Please wait...