Xantech EXP9-9 Nine Zone Expansion Module for ZPR68-10

Xantech EXP9-9 Nine Zone Expansion Module for ZPR68-10

Add 9 Additional Zones of Control to Your Xantech Remote Preamp
  • Expand the number of zones your ZPR68-10 controls
  • Gold plated RCA phono jacks
  • Operates with the Xantech RC68+ remote (the same as the ZPR68-10)



List Price: $2,750.00

Your Savings: $552.55

REWARDS: 2,197 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The EXP9 is a nine-zone expansion module designed to work exclusively with the ZPR68-10 Six-Zone Eight-Source Remote Preamp. A single EXP9 has the capability to expand the ZPR68-10 to a total of 15 zones of control, while two EXP9 units can be used to create 24 zones of control.

    The EXP9 series is available with from 1 to 9 "XCARDs" (zone expansion PCBs) installed in its nine available openings. The EXP9-9 comes equipped with all 9 cards, pre-loaded and tested at the factory, to give you 15 zones of control when combined with your ZPR68-10.

    EXP9 units are also available with any number of XCARD zones: Expansion/replacement XCARD zone cards for this item are available here. To rack mount your EXP9 please see the RMEXP.

    • The features, functions and performance of the zones on the EXP9 are identical in every way to those of the ZPR68-10
      CAUTION: The EXP9 cannot operate by itself. It must be connected to a ZPR68-10. Also, it will not operate with the original ZPR68 (older version).
    • The EXP9 connects to the ZPR68-10 via two multiconductor ribbon cables (included). One is a 26- conductor cable, the other 50.
    • As with the ZPR68-10, the EXP9 uses a multi-voltage high-current AC power supply (included).
    • Control of all zones is also possible via the COM PORT (RS232 data signal compatible) on the connected ZPR68-10.
    • As with the ZPR68-10, the EXP9 operates with IR commands from the Xantech RC68 IR Remote/Programmer (available separately). As received from the factory, each zone (as well as the XCARDs) is set to IR Code Group number 68.

  • AUDIO (ea. channel)
    • Gain (@ max VC): Unity
    • Input Overload: > 4 V RMS (@ max VC)
    • Input Impedance: > 40 k Ohms
    • Output Impedance: 470 Ohms
    • Signal to Noise: 96 dB (re 2V out)
    • THD (VC -10 dB): 0.01% at 2V input level
    • Frequency Response (+/- 3 dB): 5 Hz to 70 kHz
    • Bass Control Range (@ 100 Hz): +/- 12 dB (in 2 dB steps)
    • Treble Control Range (@ 10 kHz): +/- 12 dB (in 2 dB steps)
    • Input/Output Impedance: 75 Ohms
    • Video Insertion Loss: < 1.0 dB (50 Hz to 10 MHz)
    • RC68 Code Group Number assigned to the EXP9 (each zone): 68
    • STATUS Output (each zone): 12 V @ 10 mA, 9 V @ 90 mA (90 mA is max. current)
    • Max. Total Current Available From +12V & STATUS Terminals: 1.8 A
    • Power Requirements: 14V-0-14V AC @ 2.7 A, 8V-0-8V AC @ 0.7 A (Multi-Voltage Power supply included)
    • Gold Plated RCA type phono jacks: All A/V inputs/outputs
    • Dimensions: 14" W x 7 " H x 2.5" D
    • Weight: 4 lbs, 3 oz.

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • EXP9-1 unit
    • Power supply

Please wait...