- Details
- Specs
- Reviews
- Manuals
- What's Included
-
What is the UM506 Universal Module?
The UM506 Universal Module RECEIVES X10 ON/OFF Signals and it Closes/Opens its internal Single-pole relay switch. The UM506 is used to operate furnaces via their low-voltage thermostat wires, low voltage lighting, drapery controls, garage door openers, sprinkler systems, etc. The UM506's internal switch relay is a path interrupter for devices which are not powered above 24VDC (5A) or 30VAC (3.3A).
The X10 PRO Universal Module can close a contact momentarily when an ON signal is sent, or indefinitely until an OFF signal is sent. It can even beep when responding to signals, if you choose.
Other items that may be controlled by the X10 Universal Module include: Thermostats, drapery controls, window openers, security devices, electronic ignition fireplaces, HVAC dampers, speakers, telephones, signaling devices and more.
Important Note: Please use safety precautions when automating garage door openers and other machinery. Although most garage door openers have built-in safety features, operating one that's not within your line of sight may cause property damage, bodily harm or worse. -
General Manufacturer X10 Manufacturer Product No. UM506 Power Rating 5A, 24VDC (15A, 120VAC if properly insulated) X10 Control Responds to ALL OFF command -
- Review of 2010 Review by
-
Review of 2010
Rating Good product fast service
Posted on 1/15/2014
- Review of 2010 Review by TW
-
Review of 2010
TW
Rating No problems with delivery or operation.
Posted on 10/9/2013
- Review of 2010 Review by DAN
-
Review of 2010
DAN
Rating Works great for opening and closing the garage door.
Posted on 10/27/2011
- Review of 2010 Review by LEONARDO
-
Review of 2010
LEONARDO
Rating very good article
Posted on 10/17/2011
- Review of 2010 Review by STANLEY
-
Review of 2010
STANLEY
Rating Works as advertised. A unit I purchased 12 years ago is still functioning perfectly.
Posted on 8/21/2011
- Review of 2010 Review by PETER
-
Review of 2010
PETER
Rating No problems. Works fine. Instruction manual hard to understand with regard to using with NO/NC sensors and how to interface with a dialer
Posted on 8/14/2011
- Review of 2010 Review by RICHARD
-
Review of 2010
RICHARD
Rating I bought this for future use. I have the module that hooks to the security system and flashes all of the lights.
Posted on 7/25/2011
- Review of 2010 Review by DONALD
-
Review of 2010
DONALD
Rating relay goes to off condition on its own
Posted on 3/5/2011
- Review of 2010 Review by RANDY
-
Review of 2010
RANDY
Rating worked great
Posted on 2/13/2011
- Review of 2010 Review by CYNTHIA
-
Review of 2010
CYNTHIA
Rating I don't know if it would work, because it isn't the module I needed. The customer service rep didn't know much about the X10 system, so I bought the wrong unit.
Posted on 1/29/2011
Leave a Review
-
- 1x - X10 Universal Module
Customers Also Bought
