Visonic DA-5/0-1704-0 PIR Detector for Automatic Door Control

Visonic DA-5/0-1704-0 PIR Detector for Automatic Door Control

Special Purpose PIR Detectors for Automatic Control of Doors, Gates, and CCTV
  • Compatible with access control systems and automatic door opening systems
  • 3 detection zones with 7 beams per zone
  • Protected against reverse polarity
  • 1C / 2 Amp output relay
  • User-adjustable relay activation time (1-60 seconds)
  • Over-the-door wall mounting or ceiling mounting options
  • 12 / 24 Volt AC/DC power supply
  • Visible Light Filter
  • Request-to-Exit PIR Detector



List Price: $72.08

Your Savings: $23.38

REWARDS: 48 points
  • Details
  • Specs
  • Reviews
  • DA-5 is a passive infrared motion detector designed for use with access control and automatic door opening systems. When motion is detected, the DA-5 relay output provides signals activating the door opening mechanism. For maximum flexibility, the output activation time is user adjustable between 1 and 60 seconds. DA-5 is designed for easy installation, with options for over-the-door wall mounting or ceiling mounting. Operating power for the DA-5 may be supplied from a 12 or 24V AC or DC source. A jumper is provided on the printed circuit board for selecting the input voltage. It can be installed at various heights on the wall above the door or on the ceiling with its detection pattern directed at the floor in front of the door.

    The DA-5 consists of a plastic base to which the electronic module is fastened, and a cover assembly with a curved surface to which the milky white lens is attached. Reliable detection is provided through the no. 74 lens used in the DA-5. This lens No. 74 has 3 arrays of lens segments. Each array provides a detection zone, and all 3 zones combine to form the entire detection pattern. Any detection zone or lens segment may be masked. Beam Masking is used when the PIR is too sensitive in a specific zone. Ordinary opaque masking tape can be used to mask individual lens segments of any one of the three detection zones, or an entire zone. The masking tape will prevent the infrared energy from reaching the sensor through the blocked segment. Cut a masking tape patch that fits the dimensions of the lens area you wish to block. Apply it accurately to the inner (grooved) surface of the appropriate segment(s). In some cases, more than one layer of the masking tape may be required to completely block the infrared energy.

    The cover must be removed for:
    - Installation and wiring
    - Adjusting the timer
    - Selecting the input voltage
    - Inverting the lens for ceiling installation.

    • Part Number: 0-1704-0
    • Detection Lens: Lens No. 74
    • Detection Zones: 3 zones (A, B and C). 7 beams per zone
    • Detector Type: Dual-element pyro-electric sensor
    • Input Voltage: 12/24 VAC / DC (protected against reverse polarity)
    • Relay Switching Capability: 2 A max. at 28 V AC or DC
    • Output Relay Pull-in Period: 3 to 60 seconds, adjustable
    • Current Drain: 7 mA standby, 50 mA max @ 12 VDC; 14mA standby, 80mA max @ 24VAC
    • MOUNTING: Wall or ceiling mounting above the door. Surface mountable on top of a standard single-gang box
    • Intended Use: Indoors or in water/rain-protected outdoor areas
    • Height: 2.15 - 3 m (7 - 10 ft)
    • Operating Temperature: -10°C to 50°C (14°F to 122°F)
    • Storage Temperature: -20°C to 60°C (-4°F to 140°F)
    • Dimensions: Size: 105 x 65 x 53 mm (4-1/10 x 2-1/2 x 2-1/10 in.)
    • Weight: 95 g (3.3 oz)
    • Color: White

  • 1 Review

    Review of 73984 Review by CHRIS
    Review of 73984

    The units have been installed for 2 weeks now and are working perfectly. The price was far better "hundreds less" than what others wanted. Thank you Smarthome for an excellent internet shopping experience. Chris

    Posted on 4/9/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

Please wait...