Vanco 280723 HDMI Cat5 Balun/Extender Wall Plate Kit with IR, 50 Meters

Vanco 280723 HDMI Cat5 Balun/Extender Wall Plate Kit with IR, 50 Meters

Transmit High Definition HDMI Audio/Video Signals up to 180 feet over Cat6 Cables
  • Transmits HDMI A/V signals over Dual Cat5e or Cat6 cables
  • Extends 1080p resolutions up to 164 feet over Cat5e Cables (180 feet over Cat6)
  • Supports Full HD1080P/120HZ, 3D and 4K x 2K
  • Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD
  • IR transport channel can be forward or backward



List Price: $179.99

Your Savings: $60.45

REWARDS: 119 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Vanco 280723 HDMI Cat5 Balun/Extender Wall Plate Kit with IR is the solution for sending a long distance HDMI signal from an AV component to a HD display and then transmitting an IR signal back to that component. The signal source can be connected to such devices as a Blu-Ray Player, gaming console, audio/video receiver, cable or satellite receivers, and computers equipped with HDMI output interfaces using a short high speed HDMI cable to the HDMI Transmitter input. Connect the HDMI Transmitter output RJ-45 ports using dual-runs of Cat 5e or Cat 6 UTP cables to the included Receiver, which does not require a power supply. Connect the HDMI output from the Receiver to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection. This kit features Transmitter and Receiver baluns that mount to your wall inside a single gang junction box, providing a clean, professional looking termination point for your HDMI cable run.

    Super IR Control
    These active extenders units have the capability of transporting IR signals over the UTP cables. These extenders can control the source from the display. This is accomplished by using an optional IR Receiver pigtail attached to the receiver pointing away from the display and the IR Transmitter / Sender / Emitter pigtail attached to the sender and pointed at the source. (This product is only compatible with Vanco's Super HDMI IR Accessories)

    Over-Current Over-Voltage Protection
    The circuit boards are equipped with both over-current and over-voltage protection and automatically power down if these are encountered. The power circuit will restore itself automatically once the excessive current or voltage conditions are rectified.

    Additional Features
  • Specifications
    Manufacturer Vanco
    Manufacturer Product No. 280723
    UPC 741835091862
    Dimensions 2.75" W x 4.5" H x 1.25" D
    HDMI Version HDMI v1.4 with 3D
    HDCP Version HDCP1.2
    Support HDMI Resolution 1080P/1080i/720P/576i/480P/480i
    Support Video Color Bit Deep Color 24bit/36bit
    Support Audio Format LPCM/Dolby-AC3/DTS7.1/DSD
    Input Video Signal 5.0Volts/P-P
    Output Cable Distance 66 foot 24AWG Cable
    Input Cable Distance 66 foot 24AWG Cable
    Data Transfer Speed 6.75Gbps
    Operating Humidity Range 5 to 90%RH (No Condensation)
    Operating Temperature Range -15 to +55 Degrees C; 5 to 131 Degrees F
    Power Adapter Format Input AC (50Hz.60Hz)100-240V
    Power Supply 5V DC, UL Listed Power Supply for Transmitter (included)

    Note: Factory terminated cable assemblies be used and their length shall not exceed 100 feet of Cat 5e and 110 feet of Cat 6. HDMI cable lengths should not exceed 16 feet.

  • 1 Review

    Review of 97683 Review by CLAUDIO
    Review of 97683

    Video and audio are fine, but the IR doesn't work. I may return the whole thing if I cannot make it work, bummer!

    Posted on 11/5/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - HDMI Transmitter (Sender)
    • 1x - HDMI Receiver
    • 1x - Power Supply
    • 1x - Product Manual

Please wait...