- Details
- Specs
- Reviews
- What's Included
-
The Vanco Vanco 280721 IR Receiver Pigtail with 1.5 Meter Cable is part of the Vanco Super IR HDMI Control System. All Vanco components having the Super IR HDMI Control capability will communicate with each other. The Super IR HDMI Control components include an HDMI IR Adapter, an IR Transmitter / Sender / Emitter pigtail and this IR Receiver pigtail; each sold individually and separately. The patented HDMI IR Adapter allows the IR control channel to extend to a display, since the adapter is inserted between the display and the HDMI cable connecting to the display.
The Super IR HDMI Control System is 1080p Full HD 3D Ready and will also work with sources, displays and other electronics connected via an HDMI cable. For example, an HDMI Adapter may be installed on both ends of an HDMI cable (an additional adapter is required) connecting the source and the display. An IR Transmitter and an IR Receiver are then connected respectively to the adapters with the toggle switch set to 'IR'. This allows IR commands to travel between the display and the source. This path can also be reversed to allow IR commands to travel between the source and the display, by reversing transmitter and receiver positions on the HDMI cable. Thus upstream or downstream IR communications are possible.
This product is also available as part of a kit that includes:
2x - HDMI Adapters with IR
1x - IR Transmitter / Sender / Emitter Pigtail with 1.5 Meter Cable
1x - IR Receiver Pigtail with 1.5 Meter Cable
Installation Tips
Connect the Super IR Sender to the HDMI Matrix Selector Switch, HDMI Splitter or HDMI Extender. Install the HDMI IR Adapter between the HD TV HDMI input and the HDMI cable that is normally connected there. Attach the IR Receiver to the HDMI Adapter and move the toggle switch to the 'IR' position. Position the IR Sender (labeled TX) to point at the IR receiver on the source. Position the IR Receiver pointed outward from the HD TV display, so that an IR remote can be used to control the source. You can use an IR remote that comes with the Vanco active electronics to control that device and a universal IR control for the source. This depends on the control that you want to exercise and the control capabilities of the devices in your system. Some of the larger Vanco HDMI devices may also be controlled via the RS-232 control protocol.
-
Specifications Manufacturer Vanco Manufacturer Product No. 280721 UPC 741835091855
-
6 Reviews
- Review of 97681 Review by NICK
-
Review of 97681
NICK
Rating They don't work I've tried everything. I've tried everything that the tech assistant could thing of at Vanco still to no avail. I've tried every combination that I could think of but still nothing
Posted on 10/22/2013
- Review of 97681 Review by ERIC
-
Review of 97681
ERIC
Rating good
Posted on 7/16/2013
- Review of 97681 Review by BRAD
-
Review of 97681
BRAD
Rating Product does not work with dual band IR, or this is the excuse I received when I phoned the company for tech support. They said a new version is pending. When I called smart home to complain they said this was not noted on the company product page and that was that. I have trusted smart home for a long time, but this crappy experience has made me waste a lot of money (bought the HDMI extenders also x3), time and question buying from the company in the future.
Posted on 11/22/2012
- Review of 97681 Review by JOHN
-
Review of 97681
JOHN
Rating Don't know if IR system works or not - unable to get HDMI extender to work properly.
Posted on 8/25/2012
- Review of 97681 Review by CLAUDIO
-
Review of 97681
CLAUDIO
Rating Very dissapointed. They do not work with the HDMI wallplate extenders product#280725
Posted on 11/14/2011
- Review of 97681 Review by DONALD
-
Review of 97681
DONALD
Rating Limited range.
Posted on 11/13/2011
Leave a Review
-
- 1x - Vanco 280721 IR Receiver Pigtail with 1.5 Meter Cable
- 1x - Owner's Manual
- 1x - Vanco 280721 IR Receiver Pigtail with 1.5 Meter Cable
Customers Also Bought
