Vanco 280713 HDMI Balun / Extender Kit with IR, 30 Meter

HDMI Balun / Extender Kit with IR, 30 Meter

Transmit High Definition HDMI Audio/Video and IR Signals up to 110 feet over Cat5 or Cat6 Cables
  • Transfers HDMI and Infrared (IR) signals over Dual Cat5e or Cat6 cables
  • 100 feet over Cat5e Cables (110 feet over Cat6)
  • High speed chip set that supports full HD1080p/120HZ, 3D and 4K x 2K video resolution
  • Supports Digital Audio Format, DTS-HD/Dolby-True HD/LPCM7.1/AC3/DTS/DSD
  • Super IR control system, IR transport channel can be forward or backward



List Price: $109.99

Your Savings: $25.67

REWARDS: 84 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Vanco 280713 HDMI Cat5 Balun/Extender Kit with IR is the perfect solution for sending a long distance HDMI signal from an AV component to a HD display and transmitting an IR signal back to that component from the display. This offers a distinct advantage over most other baluns that do not allow for the IR pass through. By adding an IR Receiver and IR emitter (each sold separately) you can control the source component over the same cable.

    Connect the signal source such as Blu-Ray Player, Play Station 3, audio/video receiver, cable or satellite receivers and computers equipped with HDMI output interfaces with a short high speed HDMI cable to the HDMI Transmitter input. Connect the HDMI Transmitter output RJ-45 ports using dual-runs of Cat 5e or Cat 6 UTP cables to the included Receiver, which does not require a power supply. Connect the HDMI output from the Receiver to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection.

    Super IR Control
    These active extenders units have the capability of transporting IR signals over the UTP cables. These extenders can control the source from the display. This is accomplished by using an optional IR Receiver pigtail (SKU 97681) attached to the receiver pointing away from the display and the IR Transmitter / Sender / Emitter pigtail (SKU 97680) attached to the sender and pointed at the source. (This product is only compatible with Vanco's Super HDMI IR Accessories)

    Over-Current Over-Voltage Protection
    The circuit boards are equipped with both over-current and over-voltage protection and automatically power down if these are encountered. The power circuit will restore itself automatically once the excessive current or voltage conditions are rectified.

    Additional Features
  • Specifications
    Manufacturer Vanco
    Manufacturer Product No. 280713
    UPC 741835091770
    Dimensions 1.25" W x .875" H x 3.25" D
    HDMI Version HDMI v1.4 with 3D
    HDCP Version HDCP1.2
    Support HDMI Resolution 1080P/1080i/720P/576i/480P/480i
    Support Video Color Bit Deep Color 24bit/36bit
    Support Audio Format LPCM/Dolby-AC3/DTS7.1/DSD
    Input Video Signal 5.0Volts/P-P
    Output Cable Distance 66 foot 24AWG Cable
    Input Cable Distance 66 foot 24AWG Cable
    Data Transfer Speed 6.75Gbps
    Operating Humidity Range 5 to 90%RH (No Condensation)
    Operating Temperature Range -15 to +55 Degrees C; 5 to 131 Degrees F
    Power Adapter Format Input AC (50Hz.60Hz)100-240V
    Power Supply 5V DC - no power supply - requires Source that provides 5V DC HDMI signal

    Note: Factory terminated cable assemblies must be used and their length shall not exceed 100 feet of Cat 5e and 110 feet of Cat 6. HDMI cable lengths should not exceed 16 feet.

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x HDMI Transmitter (Sender)
    • 1x - HDMI Receiver
    • 1x - Product Manual

Please wait...