UPB Input-Output Module

Module Sends UPB Commands UponLow-Voltage Triggers
  • Three low-voltage inputs, two low-voltage outputs
  • Module delivers on/off control of devices when triggered
  • Pass-through outlet on module's face



List Price: $94.99

Your Savings: $21.27

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • You don't need to press a button or flip a switch in order to enjoy home automation. By installing the UPB Input-Output Module, you'll be able to control such low-power electrical devices as door strikes, drapery controls, garage door openers, or sprinkler valves when low-voltage events are detected, including at the ringing of a telephone or doorbell or when door or window alarm switches are triggered. The UPB Input-Output Module has three inputs and two outputs, so a single module can control several variations.

    The UPB Input-Output Module's outputs deliver on/off control for low-voltage devices. Installation is simple: The module is plugged into a standard 120VAC outlet, and the devices to be monitored and controlled are wired into a terminal block on the bottom of the module. Connected devices can also be operated manually using a UPB Wall Controller or automatically via PC through the aid of a UPB RS232 PC Interface Module (sold separately) using the free, downloadable UpStart software.

    The UPB Input-Output Module uses Universal Powerline Bus technology for superior performance and reliability. Similar to the standard X10 protocol, Universal Powerline Bus technology uses your existing power wires, so no rewiring is necessary in order to use this module. But UPB benefits include its higher reliability, since its signal strength is greater than X10, with increased electrical noise resistance.

    The UPB Input-Output Module plugs into your wall, but you won't lose an outlet: The connections to be controlled install in the bottom of the module, but a pass-through outlet is included as well, for a non-controlled appliance. The appliance can even be integrated into scenes. The UPB Input-Output Module is designed for indoor use with devices that plug into a power outlet.

    If you're just getting started with automating your lights and appliances, a UPB starter kit is available and sold separately.

    Please note: UPB products are not X10 compatible

  • Specifications

    Simply Automated Product No.: SAUMI32W
    Dimensions: 3.4" H x 2.6" W x 1.5" D (86mm x 65mm x 38mm)
    Weight: 8 oz. (220g)
    Power: 120VAC +/- 10%, 60Hz, 83mA
    Mounting: Plug-in
    Inputs: 3
    Input 1: 4-5V AC/DC sense or phoneline (ring detect); 100 VDC / 140 VAC max.; min. pulse duration: 161 mS
    Input 2: 4-5V AC/DC sense or contact closure; 30 VDC / 42 VAC max.; min. pulse duration: 73 mS
    Input 3: 4-5V AC/DC sense, 200mA sense (doorbell), or contact closure, or line level audio presence; 30 VDC / 42 VAC max.; min. pulse duration: 73 mS
    Outputs: 2
    Output Type: Isolated solid-state
    Maximum Rating: 60 VDC / 84 VAC @400mA
    I/O Termination: Screwless, #22 to #14AWG solid wire
    "Always On" Outlet: 120VAC @15A
    Operating Temperature: 30°F - 120°F (0°C - 50°C)
    Approvals: ETL listed

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • UPB Input-Output Module
    • Instructions

Please wait...