Insteon Remote Control Dimmer Switch, Toggle - White

Insteon -Compatible Dimmer With a Classic Look
  • Control lights remotely, turning them on and off and adjusting brightness levels
  • Incorporate a light into multiple lighting design scenes in minutes
  • Familiar toggle control to match your home's décor
  • Easy-to-install dimmer uses Insteon technology for superior performance and reliability
  • Works with both Amazon Alexa and the Google Assistant for voice control ( Insteon Hub required, Alexa device and Google Assistant device each sold separately)


  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Make your home the envy of your neighborhood with the sophistication of the Insteon ToggleLinc Dimmer. In just minutes you can install a ToggleLinc Dimmer switch, link it to an Insteon controller and be remotely controlling your lights from anywhere.

    The Most Advanced Toggle Dimmer
    You can also link your new ToggleLinc Dimmer to other Insteon-compatible switches or controllers to create a variety of light scenes with just the touch of a button. There is no need to rewire your home; just spend a few seconds setting up scenes for "Home," "Dinner" or "Night Time," and your ToggleLinc will automatically adjust the lights you selected to your pre-defined settings. With the ToggleLinc Dimmer's remote control ability, you can have the convenience of adding a bedside controller to turn off your lights after you get into bed. Never come home to a dark house again: Install a Insteon Hub to schedule your ToggleLinc dimmer or any Insteon-compatible device to turn on or off at any specific time or even at sunrise and sunset. The ToggleLinc dimmer can control up to a 600-watt load. Note: anytime Insteon ToggleLinc Dimmers are placed directly adjacent to one another, you must subtract 200 watts of capacity from each dimmer. If three dimmers are adjacent to one another, then 400 watts must be subtracted from the capacity of the center dimmer.

    If you need a non-dimmable switch to control fluorescent lights, electronic ballasts, halogen lamps and low-voltage lighting transformers, use the Insteon ToggleLinc Relay (Non-Dimming).

    View our Video:

    Scene Lighting - Change the Lighting to Match Your Mood
    Use this switch like any other dimmer to create the perfect on-level with one light, or save your settings to remember pre-determined lighting and fade rates. Push this toggle switch on once for a softly lit glow in the middle of the night or push it on twice for full lighting at dusk.

    True Toggle Action with Beautiful, High Quality Construction
    The Insteon ToggleLinc Dimmer offers the natural feel of high-end switches: flip up to turn lights on, flip down to turn lights off. You'll also love the crisp, tactile response with each flip, instead of the mushy feeling of other brands. The ToggleLinc is designed and manufactured to ISO9002 specifications and goes through over 10 quality control tests. You'll thank yourself for choosing this premium quality product.

    Easy To Install
    The Insteon ToggleLinc Dimmer is so easy to install and set up and yet so affordable, you'll want to replace all of your switches with ToggleLinc Dimmers. Just remove the old switch, reattach the line, load, and ground wires with the addition of the neutral wire using the included wire nuts, and you're done.

    Brightness Levels
    Adjust the brightness level of your light locally by pushing and holding the ToggleLinc Dimmer in the on position. Use the brightness levels to create just the right amount of lighting for your mood. From the toggle switch you can preset up to 32 brightness levels, or program in one-percent increments using software. The white status LED indicates the current status of the light being controlled. When the ToggleLinc Dimmer is turned off, the white LED illuminates to help with finding the switch in the dark.

    Adjustable Ramp Rate
    You can adjust the speed at which the controlled light turns on or off, also known as the ramp rate. For example, you may want the light in the stairwell to turn on instantly so you can see where you're walking, or you may want the light in the master bathroom to ramp up in a soft, gentle fashion so you're not blinded in the middle of the night. The ramp rate is adjustable between 0.1 seconds and 9 seconds if programmed locally and can extend up to 8 minutes when using software.

    Create Multi-Way Circuits
    Do you have two or three switches that you wish could all control the same light? The ToggleLinc Dimmer allows you to customize your lighting scenes without rewiring your home. These complicated lighting circuits are made simple using Insteon technology because you won't need to use traveler wires to create the electrical connections.

    First replace all of the switches you want to include in the circuit with toggles. The primary dimmer must be connected to the standard wires: load, line, neutral, and ground. The secondary dimmers only need to be connected to line, neutral, and ground. Since no traveler wires are needed, it is easy to place a dimmer wherever you need it. Finally, cross-link all of the secondary dimmers to the primary dimmer for a flexible, fully functional multi-way circuit.

    Non-Volatile Memory
    All Insteon ToggleLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the ToggleLinc Dimmer will return to its last brightness level when power is restored.

    Need a Wall Plate?
    Be sure to order a wall plate for each ToggleLinc dimmer.

  • General
    Manufacturer Insteon
    UPC 689076400541
    Patent No. U.S. Patent No. 7,345,998, Foreign Patents (See
    Color White
    Warranty 2 Years
    On-Levels 32 locally, increments of 1% with software
    Ramp Rates (full-ON to full-OFF) 0.1 to 9 seconds if programmed locally, 0.1 seconds to 8 minutes if programmed remotely
    LED Indicator Insteon
    Multi-Way Circuit Support One ToggleLinc Dimmer controls load, Cross-Link any number of ToggleLinc Dimmers or other Insteon Controllers
    Setup Memory Non-volatile EEPROM
    Insteon Features
    Insteon Addresses 1 hard-coded out of 16,777,216 possible
    Insteon Links 417
    Insteon Powerline Frequency 131.65 KHz
    Insteon Minimum Transmit Level 3.2 Vpp into 5 Ohms
    Insteon Messages Repeated Yes
    Ramp Rates (full-ON to full-OFF) 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software
    Paddle Type Toggle
    Wire Nuts 3 included
    Mounting Mounts in single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent ToggleLinc Dimmer installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating.
    Operating Conditions Indoors, 32 to 104° F, up to 85% relative humidity
    Dimensions 1.73"w x 4.14"h x 1.73"d (front bracket)
    1.74"w x 2.71"h x 1.40"d (main body)
    Weight 3.6 oz
    Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
    Power Wire Leads 6", 16 AWG, stranded, 600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
    Maximum Amps 5 amps
    Ground Lead 6", 18 AWG, stranded, bare copper
    Load Types Wired-in incandescent lighting devices
    Maximum Load 600 Watts
    Power Consumption 1.38 Watts
    Certification Safety tested for use in USA and Canada (ETL #3017581)
  • Reviews 1 - 10 of 161

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 17
    Solid device, needs to support LED light bulbs though Review by Scott
    Solid device, needs to support LED light bulbs though

    -1 star for not adequately supporting LED dimmable bulbs.
    -1 star because the plastic on the switch is not UV-stable. My white switch turned yellow after about a year of being in direct sunlight.

    Originally, I was using this switch as a "nightlight" of sorts in my master bathroom. The switch was programmed to dim the lights after a certain time so as to not blind anybody if they needed to get up and use the bathroom during the night. However, after upgrading all the lightbulbs in my house to LED, the dimming capability of this switch stopped working because it can't dim below 5W. (This took the "wife acceptance factor" down significantly for this particular switch.)

    Posted on 9/18/2019

    Perfect with Alexa- App needs help Review by AnthoHead
    Perfect with Alexa- App needs help

    I really like this switch but am moving to the paddle switches. This one works fine, but pretty laggy at times. Using Alexa is much easier for dimming and the app is clunky- but that's for all insteon. Only other concern is that it's not dual band so you need to be closer to the hub or have an extender.

    Posted on 9/3/2019

    Works Great Review by Masco81
    Works Great

    I have 6 of these throughout my house and they work great. You have to get used to the feel of the switch initially because it almost feels as if the switch is broken because it "sits" in the middle (if that makes sense.) I'm waiting on the next sale to buy more.

    Posted on 11/7/2015

    Worked for awhile Review by Gary
    Worked for awhile

    Worked great for about 90 days, then stopped functioning. $50 for 90 days is NOT a bargain!

    Smarthome response: We're sorry it stopped functioning and hope you reached out to get a free replacement as part of the 2 year warranty.

    Posted on 4/16/2015

    Review of 2466dw Review by ANGELINA
    Review of 2466dw

    it did not work, It did not even turn the lights on automatically.
    I had a RadioShack control that worked for 10 years, I wish I could buy something that worked, I talked to the SmartHome People and I can't find something like what I had, just plug it and it works.

    Posted on 6/4/2014

    Review of 2466dw Review by JAMES
    Review of 2466dw

    Works as advertised. No problems

    Posted on 4/27/2014

    Review of 2466dw Review by JAMES
    Review of 2466dw

    it works, customer support is bad

    Posted on 3/8/2014

    Review of 2466dw Review by JEFFREY
    Review of 2466dw

    Works perfectly with incandescent lamps and CFLs, but not with LEDs - they continue to glow dimly even when "off"..

    Posted on 3/5/2014

    Review of 2466dw Review by CHRISTOS
    Review of 2466dw

    Replaced old X10 push button switches with these cool new togglelinc dimmers, they look great and were an easy swap out for installation and very easy to link/control. Great product and will be adding more to my home control network!

    Posted on 2/3/2014

    Review of 2466dw Review by HEATHER
    Review of 2466dw

    Worked as promised - paired two of these to control a 3 way light circuit from two switches.

    Posted on 2/1/2014

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Toggle Dimmer
    • 2x - Mouting Screws
    • 3x - Wire Nuts
    • 1x - Quick Start Guide

Please wait...