- Details
- Specs
- Reviews
- Manuals
- What's Included
-
Steinel America FL300B Outdoor Dual Floodlight Motion Sensor has a variety of key features to ensure that it operates at peak expectations to provide a high level of protection for your property. The Motion Sensor Flood Light has a 140° detection angle with 40 foot range, and its floodlights are adjustable horizontally (270°) and vertically (65°). The length of time with which the floodlight will stay on is fully customizable from as little as 10 seconds to as long as 15 minutes. It is perfectly suited for outdoor use as it has an IP54, UL rating with a rain tight enclosure to protect it from the elements. This Motion Sensor Flood Light is compatible with Par, PL, fluorescent, R or quartz lamps, with a max of 150 watts each, 120VAC.
Applications
- Exterior: entryways, carports, balconies, patios
Intended uses- Outdoor lighting
- NOT suitable for alarm systems
Environmental considerations- Weather can affect operation of the sensor. Strong gusts of wind, snow, rain and hail can cause switching errors since the sudden temperature changes cannot be distinguished from heat sources.
Needed for installation- Exterior wall mount installation: Weatherproof double-gang junction box with gasket (mounting screw holes are 5.25" apart)
- Exterior wall mount installation without double-gang box: Crossbar (included), Weatherproof silicone caulk
- Soffit mounting: Weatherproof junction box, 1/2" threaded cover plate with foam gasket and cover plate screws
Light level function
The light level feature keeps lighting off during daylight hours, regardless of occupancy.
Manual override
Adding a wall switch provides a manual override function. While the switch is ON, the sensor is in occupancy control mode. Users can turn the switch OFF at any time to keep lights OFF. The switch can be used to override lights ON for 4 hours. To do this, the switch must be in the ON position and the sensor has gone through warm up. Toggle switch OFF ON OFF ON within 2 seconds. Lights will now remain on for 4 hours. To verify that the sensor is in manual override, you should see a red indicator light behind the lens in the upper right hand corner. To resume sensor mode prior to the 4 hours, simply flip the switch OFF ON once within two seconds. Lights will turn off and the sensor returns to sensor mode.
Surge protection
Every sensor contains built in surge protection. This feature will reset the unit automatically after power surges, power outages, and power shortages. Surge protection protects the sensor if it is miswired as well. If miswired, shut off power, correct the wiring and the sensor will then operate correctly.
Time delay
Time delay is the period of time lights remain on after the last detection. Adjustment ranges from 10 seconds (factory setting) to 15 min.
Coverage size
With an installation height of 8 to 12 feet, maximum reach is 40 feet. If needed, the detection zone can be adjusted. Coverage may vary depending on mounting height and environmental conditions.
Coverage adjustment - shrouds
Shrouds snap in place allowing users to adjust coverage. Shrouds cover any desired number of lens segments and reduce coverage. Undesired detection of cars, pedestrians, etc. outside the desired detection range can be eliminated. The shrouds are made up of six 10° sections which can be snapped or cut off individually. The shrouds can be easily clipped on to the unit without changing the lens
Coverage adjustment - lens rotation
The sensor's field of view can be aimed 130° horizontally and 65° vertically to best meet the application requirements. The sensor should not tilt to face upwards but should be aimed at least 15° below horizontal for ideal detection.
Aim N' Lock - light adjustment
STEINEL's unique Aim N' Lock lampholders do not require tools and ensure that lampholders remain locked in place without sagging or becoming loose over time. Each lampholder can be adjusted in two locations. To rotate the lampholder's arm, (for vertical direction of lamp) simply pull out, align to desired position, and push in to lock back in to place. The lampholders can also swivel to aim the lamps horizontally as needed.
-
Specifications
Manufacturer: Steinel Manufacturer Product No.: FL300B Detection Angle: 140° Range: 40' Adjustable Aim: 270° horizontal, 65° vertical Adjustable Time: 10 sec to 15 min Adjustable Lux (light) Sensor: daylight to full dark Acceptable Bulb Types: Par, PL, fluorescent, R or quartz lamps Maximum Bulb Wattage: 150 Watt Max Each
-
9 Reviews
- Review of 4650b Review by MILTON
-
Review of 4650b
MILTON
Rating Nicely made and are working very well so far. The all plastic construction seems sturdy enough, wish it were metal. Did find similar function all metal fixtures at Costco for less than $50, but didn't appear as "refined" as these. I probably would have gone with Costco had I known and saved the money.
Posted on 7/23/2014
- Review of 4650b Review by TERENCE
-
Review of 4650b
TERENCE
Rating Excellent product and great service as always. It is a pleasure doing business with a company that really has their act together with great customer service. Terry
Posted on 2/29/2012
- Review of 4650b Review by Scot
-
Review of 4650b
Scot
Rating First rate product. Read the instructions carefully before installing. There's a simple test to check function. As previously noted, you may have to bend electrical contact tabs in base of lamp socket so they contact bulb correctly. Oddly, base plate mounting holes match no electrical box at the local wholesale supplier, so I had to drill my own holes through the plate.
Posted on 2/19/2012
- Review of 4650b Review by SETH
-
Review of 4650b
SETH
Rating Easy to install and works much better than the unit it replaced.
Posted on 8/8/2008
- Review of 4650b Review by JOSEPH
-
Review of 4650b
JOSEPH
Rating Product works as described. It's the only motion detector security light that can be mounted 20 feet above ground and still works!
Posted on 8/18/2007
- Review of 4650b Review by LINDA
-
Review of 4650b
LINDA
Rating Works well
Posted on 1/2/2007
- Review of 4650b Review by BETH
-
Review of 4650b
BETH
Rating Easy to install - works perfectly.
Posted on 8/18/2006
- Review of 4650b Review by JOHN
-
Review of 4650b
JOHN
Rating Very pleased.
Posted on 12/17/2004
- Review of 4650b Review by DAVID
-
Review of 4650b
DAVID
Rating I was not familiar with the Steinel light, so I called Customer Service to answer some questions. The Customer Service rep was extremely helpful and went out of his way to answer my questions. I was very impressed by your support. I would definitely buy from Smarthome again.
Posted on 4/28/2004
Leave a Review
-
- 1x - FL300 Outdoor Sensor with Dual Lampholders
- 1x - Crossbar
- 2x - Washers
- 2x - Nuts
- 1x - 3" Chase Nipple
- 4x - Mounting Screws
- 2x - 1/2" Phillips Screws
- 2x - Shrouds
- 2x - Wire nuts
- 1x - Standard Backplate (Wall Mounting)
- 1x - Solid Backplate (Soffit Mounting)
- 1x - Installation Instructions
- 1x - FL300 Outdoor Sensor with Dual Lampholders