Smarthome SELECT LCD Compatible IR Receiver Kit with Surface Mount Sensor

Smarthome SELECT LCD Compatible IR Receiver Kit with Surface Mount Sensor

Control up to 8 Units of IR-controlled A/V Devices Behind Doors or Closets Using your Existing IR Remote Controls
  • Four dual-emitters included, each control up to two devices for a total of eight possible devices
  • LCD compatible design ensures best possible results with IR receiver located near an LCD display
  • LED feedback on the receiver provides verification of IR communication
  • The included connecting block provides quick and easy installation of the kit components
  • 12VDC 500mA power supply is included for powering the IR Receiver kit components



List Price: $179.99

Your Savings: $50.00

REWARDS: 129 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Interference from your wall mounted TV can limit the effectiveness of your IR control system. The Smarthome LCD Compatible IR Receiver Kit has been designed to suppress various types of interference, including Plasma, LCD, LED TVs, indirect sunlight, and energy-saving light bulbs.

    The kit allows you to use an existing infrared (IR) remote control to operate up to eight audio/video (A/V) components located behind closed doors or walls in an entertainment cabinet or equipment closet. The built-in IR distribution technology gives you the ability to conceal, yet still control, bulky electronic equipment such as a cable or satellite TV receiver, stereo receiver, or amplifier, CD player, DVD player, Blu-ray player, or virtually any component controlled by an IR signal.

    This kit comes with everything needed for a complete IR repeater system. No more leaving cabinet doors open or struggling to remotely access your hidden equipment, you'll be able to control up to eight hidden A/V components with extreme reliability.

    Quick Tip: You can eliminate potential IR signal loss and interference and increase the signal reliability of the IR Emitter attached to your Audio / Video (AV) component with the addition of a Smarthome SELECT IR Emitter Shield (sold separately).

    How it Works
    The system uses an IR receiver to take in the IR signals from an existing remote control and distribute those signals via IR emitters to A/V components. Point the remote at the IR receiver to send the appropriate commands to your hidden A/V components. The receiver was specifically designed to reduce interference from Plasma, LCD, and LED TV screens that cause other IR receiver systems to fail.

  • Specifications

    Manufacturer: Smarthome
    Brand SELECT
    Manufacturer Product No.: 59503
    UPC: 813922011531
    IR Emitter Outputs: 4
    Output Emitters Included: 4
    Warranty: 30 days, limited

    Dual-Band IR Receiver

    Carrier Frequency: 38K + 2K and 56K + 2K Hz
    Control Range: 38KHz up to 50 feet and 56KHz up to 30 feet indoor on axis, depending on remote strength and ambient interference and 15 to 20 feet in direct sunlight
    Reception Angle: Up to 20 feet distance for + / - 45 degree off axis
    LED display: Activity LED: When IR received the signal form remote controller the Red LED indicates IR signal activity a completed circuit with a terminator or an Emitter

    Status LED: The Blue LED for System On/Off indication

    IR Lens: reject visible light interference.
    Room to Room Wire Recommendation: Using 4 - conductor (min.) 24 gauge unshielded solid or stranded copper wire up to 1000 feet ( 300M ) length
    Power Requirement: DC 12V, (500~1200mA), Using a regulated adaptor is always recommended
    Dimension: 32(L) x 13(W) x 12(H) mm

    Dual-Band IR Emitter

    Blinking: Non-blinking version with peak wavelength 940nm
    Cable Length: 10 feet
    Plug: 3.5mm mono standard plug
    Mounting: Self-adhesive tape for quick and easy fixing on any hard, clean & dry surface
    Design: Emitters feature a compact oval shape, with infrared (IR) built into a transparent housing
    Power Requirement: DC 12V, (500~1200mA), Using a regulated adaptor is always recommended
    Dimension: 32(L) x 13(W) x 12(H) mm

    Power Supply

    Voltage: 12VDC 500mA power supply

  • Reviews 1 - 10 of 21

    1. 1
    2. 2
    3. 3
    Review of 59503 Review by MARK
    Review of 59503

    Works great!

    Posted on 7/29/2013

    Review of 59503 Review by JEFFREY
    Review of 59503

    Easy hook up. Very pleased with products function. Just a bit over priced. JN

    Posted on 1/3/2013

    Review of 59503 Review by WILLIAM
    Review of 59503

    Works as described. I used LAN wire to extend the ir Reciever wire. Great install works like a charm.

    Posted on 3/17/2012

    Review of 59503 Review by First Reviewer
    Review of 59503

    Seems to Work Great. The only problem that I see is that it only works for one product at a time. Live and Learn. I put this on my DVR and it works without any delay as far as I can tell. Anyway if you have a TV are any IR Product that is out of the way the pick one of these Extenders up, it sure helps out.

    Posted on 1/12/2012

    Review of 59503 Review by KEVIN
    Review of 59503

    emitters are so so, incorporated other emitters into the system to get all of the components to work properly. Other than that, installation was easy.

    Posted on 12/1/2011

    Review of 59503 Review by tom z
    Review of 59503

    Listed as working with Scientific Atlanta but it does not. Do not buy this product if using Scientific Atlanta cable box.

    Posted on 11/24/2011

    Review of 59503 Review by MDUBYA
    Review of 59503

    Very easy to splice with CAT5e for remotely placed blasters. Product works very well with LCD and LED tv's and a variety of AV equipment.

    Posted on 9/20/2011

    Review of 59503 Review by JOEL RUSH,
    Review of 59503

    Did not work with my UVerse DVR and had to send it back

    Posted on 8/10/2011

    Review of 59503 Review by CHRIS
    Review of 59503

    This was everything they said it would be.. Shipped promptly, install was easy, works great!!

    Posted on 6/23/2011

    Review of 59503 Review by uverse customer
    Review of 59503

    Got this to work with all my components except my AT&T Uverse Motorola VIP1200 set top box. very disappointed considering it was listed as being compatible.

    Posted on 6/18/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - IR connecting block
    • 1x - Dual-band IR receiver with 4-conductor cable
    • 4x - Dual IR emitter
    • 1x - 12V/500mA power supply

Please wait...