Smarthome SELECT Hidden IR Repeater Kit with Surface Mount Sensor

Control Audio Video Components in Entertainment Cabinets or Equipment Closets using Existing IR Remote Controls
  • Use an existing IR remote control to operate hidden audio video components
  • Allows IR signals to pass through solid doors or walls, line-of-sight to the components is not required
  • Four dual emitters allow for remote control of up to eight devices
  • Confirmation LED built-in to the IR receiver acknowledges receipt of IR commands
  • 40 foot range between an IR remote control and the IR receiver

Item #: 59501 IN STOCK - SHIPS TODAY


List Price: $29.99

Your Savings: $8.00

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Smarthome SELECT Hidden IR Repeater System allows you to use an existing infrared (IR) remote control to operate up to eight audio/video (AV) components located behind closed doors or walls in an entertainment cabinet or equipment closet. The built-in IR distribution technology gives you the ability to conceal, yet still control, bulky electronic equipment such as a cable or satellite receiver, stereo receiver, amplifier, CD player, DVD player, Blu-ray player, or virtually any component controlled by an IR signal. The system uses an IR Receiver to take in the IR signals from an existing remote control and distribute those signals via IR Emitters to AV components. No longer do you have to leave cabinet doors open or struggle to remotely access your hidden AV equipment, you'll be able to reliably control your hidden components from up to 40 feet away The result is the freedom to have an installation that offers a clean, modern look by keeping all the AV eyesores out of sight.

    40 Foot Range Dual IR Emitters
    LED Indicator Light DIY Installation

    An extended wireless range of 40 feet is 10 feet further than other similar products Less clutter with the same control, 4 wires with 2 IR Eitters instead of 8 wires with 1 IR Emitter A built-in LED indicator light on the IR Receiver lets you know the IR signal has been received Simple plug and play installation will have you in control within minutes

    How it Works


    This convenient home theater accessory is easy to use and sets up in minutes, no electrician of professional installer required. Start by mounting the IR Repeater in your equipment cabinet using the included Velcro tape. Plug the 1/8 inch mini jack plug end of the IR Emitters into the repeater box and attach the other end to the IR window of each AV component you wish to control. Next, plug the 4-pin Connector from the IR Receiver into the IR Repeater box and place the other end in a location where it can receive line-of-sight signals from your IR remote control; ideally this will be on a shelf or on an exposed part of the cabinet. Double sided tape has been pre-installed on the IR emitters and the IR receiver to make this process easier. That's it, now you just use your remote control as you normally would, a confirmation LED indicator light on the IR receiver will let you know when the system has received a remote control command.

    The included emitters can control many different A/V components. They're made of material that is transparent to IR light, so commands can still pass directly to individual components if desired. Each emitter cord is approximately six feet in length, with two emitters split off the of end; the emitter wires can be peeled away from each other to allow for a variety of mounting positions.

    System Notes

        •  When placed in an enclosed cabinet or closet, some AV components will require additional ventilation or a cooling fan
        •  Protect the IR Receiver from interference from Plasma, LCD, and LED TVs
        •  Protect the IR Receiver from excess ambient light, including direct sunlight, floodlights, halogen or fluorescent lamps
        •  Avoid IR emitter cables blocking equipment doors and slots that may need to be opened
        •  Attach the IR emitter directly to the component or to a shelf facing the component's IR eye (within 3 inches)
        •  Placing two IR emitters on the same component will not improve performance
        •  Do not attempt to open the power supply or IR repeater box, doing so will void your warranty
        •  The Hidden IR components are not weather-resistant, do not expose this system to moisture
  • General
    Manufacturer Smarthome
    Brand SELECT
    Manufacturer Product No. 59501
    UPC 718122393411
    Dimensions (Approximate) IR repeater box: 2 5/8" L x 2 1/8" W x 7/8" T
    IR emitter cord: six feet in length
    IR receiver cord: six feet in length
    Power cord: five feet in length
    Emitters Four cables with 1/8" mini jack plugs - each cable has two emitters for a total of eight emitters
    IR Receiver Range 40 feet (may vary depending on actual operating conditions)
    Power Supply 120V-240V, 50-60Hz, 0.15A max LPS, 12V 0.2A output
    Smarthome Warranty 2 Years
  • Reviews 11 - 20 of 675

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 68
    Review of 59501 Review by DONNA
    Review of 59501

    We have not installed it yet. Waiting for brother-in-law to visit!

    Posted on 2/2/2014

    Review of 59501 Review by DONNA SUE
    Review of 59501

    We have not installed it yet. Waiting for brother-in-law to visit!

    Posted on 2/2/2014

    Review of 59501 Review by CHRIS
    Review of 59501

    It works fine but the plastic ends fall off way too easy. The box also has flimsy connectors.

    Posted on 1/23/2014

    Review of 59501 Review by THOMAS F
    Review of 59501

    Works like it says it will! Straight out of its package.

    Posted on 12/27/2013

    Review of 59501 Review by ED
    Review of 59501

    This is my 3rd.kit,they're working just great.

    Posted on 11/22/2013

    Review of 59501 Review by JOSEPH
    Review of 59501

    Silly expensive like everything from Smarthome but works as described and solved my problem.

    Posted on 10/4/2013

    Review of 59501 Review by WILLIAM
    Review of 59501

    Had to return because it would not work with my cable box. The next repeater I bought worked fine.

    Posted on 9/2/2013

    Review of 59501 Review by D. Pereira
    Review of 59501

    Will NOT work with Comcast Motorola cable box. This should be a disclaimer in the details. Got it home and waited too long before connecting it. Went on-line and saw a bunch of reviews other than Smarthome that stated Comcast IR is very touchy. Returned it but they would only gave me partial credit because more than a month had passed. My fault for not checking it out sooner.

    Posted on 8/28/2013

    Review of 59501 Review by ROBERT
    Review of 59501

    Works great, fast shipping

    Posted on 8/13/2013

    Review of 59501 Review by JAYASHREE
    Review of 59501

    This was easy to connect & get going...

    Posted on 7/13/2013

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Hidden IR Repeater Box
    • 4x - Dual Output Emitters with six foot cord and 1/8 inch mini-plug connector
    • 1x - IR Receiver with 6 foot cord and 4-pin DIN connector
    • 1x - Plug-in Power Supply with 5 foot cord and barrel connector
    • 1x - Strips of Velcro with adhesive backing for mounting
    • 1x - Quick-Start Guide

Please wait...