SkylinkHome WR-001 Lighting Receiver In-Wall Dimmer Switch, 300 Watts

Remote Controllable In-Wall Dimmer Switch for Incandescent or Dimmable CFL Bulbs
  • Touch-sensitive control of load
  • Simply replaces existing switch
  • No neutral wire required
  • On/Off, and dimming
  • Works with incandescent & dimmable CFL bulbs
  • Three operating modes
  • Energy saving countdown mode



List Price: $25.67

Your Savings: $3.21

  • Details
  • Specs
  • Reviews
  • What's Included
  • The WR-001 Lighting Receiver In-Wall Dimmer Switch was designed to operate a 300 watt load at 120 volts of alternating current (120VAC) for either incandescent or CFL bulbs. This switch features an On/Off or relay function as well as a dimming function which will only work with dimmable bulbs. To use this dimmer switch simply replace your old pr-existing switch with the new WR-001. Being that there is no neutral wire needed for the WR-001 to operate replacing the old with the WR-001 will be as easy as disconnecting then reconnecting two wires. Once properly installed you will be able to wirelessly turn on and off, or dim and brighten lights powered by the switch from a variety of SkylinkHome transmitters. This switch offers a touch-sensitive surface allowing you to control the load by a brush of your finger across the surface. Snap-on wireless remote TM-318 can be used as a remote controller for this dimmer and physically attaches to the switch face. When attached, the touch-sensitive surface is covered and the TM-318 is used to control the load. To achieve remote control over the WR-001 from a wireless transmitter, you must first program the switch to be a responder of that transmitter. The programming is a very simple process done with the set buttons located on the switch and on the transmitter. A maximum of 8 transmitters can be paired to one WR-001 dimmer switch. This allows you to add more wireless hand-held remote controllers, or motion sensors to your system for flexibility, security, and comfort. A cover unit can also be added to help extend the life of the switch, add touch-sensitive control and upgrade the appearance.

    The SkylinkHome System comprises a variety of wireless sensors, wireless remotes, wire-in and plug-in lighting or appliance controls. All wireless communication between SkylinkHome devices is based on rolling code technology. This ensures the highest security for your wireless signals being transmitted. For zone programming of these devices or to make this switch a member of a "Zone" (a group of lights controlled at the same time), you will need to purchase the 10 Button Deluxe Remote separately.

    SkylinkHome Receivers:

    WE-001 Lighting Receiver In-Wall On/Off Switch, 1,000 Watts
    PR-318 Remote Controllable Plug-In Dimmer with Repeater
    PL-318 Remote Controllable On/Off Plug-In Dimmer
    PA-318 Remote Controllable Indoor/Outdoor Plug-In On/Off Control Module
    MR-318 Remote Controllable Wire-In On/Off Control Module
    MD-318 Remote Controllable Wire-In On/Off/Dimming Control Module

    SkylinkHome Sensors & Transmitter Controllers:

    TC-318-10 Deluxe Hand-Held Wireless Remote Transmitter, 10-Button
    TC-318-1 Simple Hand-Held Wireless Remote Transmitter, 1-Button
    ID-318 Battery-Operated Motion Sensor Transmitter
    TB-318 Wireless Battery-Operated Wall Mount Transmitter

  • Specifications
    Manufacturer SkylinkHome
    Manufacturer Product No. WR-001
    UPC 623459300332
    Input voltage 120VAC 60Hz
    Standby current 0.2mA
    Minimum load 10 Watts
    Maximum load 300W @ 120VAC
    Operating frequency 318MHz
    Operating temperature -4 to 140 degrees F
    Humidity 5% - 95%
    Range Up to 500 feet (in open area)

  • 6 Reviews

    Review of 73049 Review by KENNETH
    Review of 73049

    Worked as advertised and easy to install

    Posted on 1/15/2014

    Review of 73049 Review by IRENE
    Review of 73049

    Great product - easy install and works like a charm. Measurably cheaper than competitors.

    Posted on 6/26/2013

    Review of 73049 Review by JOSEPH
    Review of 73049

    Purchased in combination (TM-001, WR-001, TB-318). Switch works well. I had to add one incandescent bulb along with the two CFL otherwise bulbs flickered terribly with all CFL's. I feel the manufacturer mislead as they claim it works with CFL - it does, but not if you don't have at least one incandescent - less one star. The switch does appear to be designed well and constructed well.

    Posted on 3/30/2013

    Review of 73049 Review by Nguyen
    Review of 73049

    Great switch
    Easy for programming
    Good price

    Posted on 1/15/2012

    Review of 73049 Review by HAROLD
    Review of 73049

    These dimmers are installed and working just fine, although 300 Watt ratting forced me to replace 6 light bulbs to get the dimmer switch to work.

    Posted on 9/7/2011

    Review of 73049 Review by STEPHEN
    Review of 73049

    Switch works great!

    I am using this along with the TB-318 Wireless Battery Operated Wall Mount switch to turn a existing single switch into a three-way switch setup without having to run any wiring. I am using this switch in the on/off only mode to control fluorescent lights.

    Switch was easy to install, even in my existing 3 gang box (the switch faceplate is removable, btw. The switch simply replaces a existing switch.

    Works just fine.

    Posted on 7/7/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - WR-001 ON/OFF Wall Switch Dimmer
    • 1x - Package of wire nuts
    • 1x - User's instructions

Please wait...