Sensaphone FGD-0101 Weatherproof Temperature Sensor for Sensaphone Monitoring Systems

Sensaphone FGD-0101 Outdoor Weatherproof Temperature Sensor

Monitor Outdoor Temperatures from a Sensaphone System
  • Sensor works with Sensaphone 400, 800 and Web600 controllers
  • Sensaphone 2.8K Series sensor
  • Weatherproof sensor monitors temperature outside your home
  • Temperature range of -20° F to 176° F ( -28° C to 80° C)
  • Temperature accuracy of ± 1° F (0.56° C)
  • Must be hardwired to a Sensaphone controller (12 feet of wire connectors pre-installed)



List Price: $30.00

Your Savings: $3.00

REWARDS: 27 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Sensaphone FGD-0101 Outdoor Weatherproof Temperature Sensor delivers remote monitoring of the temperature and possible leaks outside your home. It is designed to work with the Sensaphone 400, 800 or Web600 remote monitoring system controller. To connect the probe, remove any existing wiring or sensors (including the local thermistor) from the input terminal on the controller and attach the wire from the Outdoor Weatherproof Temperature Sensor probe to the input terminal and ground, respectively. The Sensaphone controller can be be programmed to send an alarm when conditions exceed the set high or low temperature limits; -20° F to 176° F ( -28° C to 80° C). This temperature sensor features 12 feet of pre-wired wire connectors, compact size, weatherproof probe, and is accurate to ± 1° F (0.56° C). It may be used anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments. Please note however that the Outdoor Weatherproof Temperature Sensor should never be submerged completely in water and only one sensor may be wired per input on Sensaphone controller.

    For monitoring indoor temperatures, consider using the Sensaphone FGD-0100 Indoor Room Temperature Sensor.

  •  Specifications

     Brand  Sensaphone
     Manufacturer Part #  FGD-0101
     Sensor Temperature Range  -20° F to 176° F | -28° C to 80° C
     Temperature Accuracy  ± 1° F (± 0.56° C
     Connection  Hardwired (12 feet of wire pre-connected)
     Sensor Series  2.8K Series
  • 6 Reviews

    Review of 7020a Review by RONALD
    Review of 7020a

    Easy to install and assign to system works great.

    Posted on 12/28/2012

    Review of 7020a Review by JAMES
    Review of 7020a

    easy to mount and works well with Sensaphone WEB600. Can use on a really long piece of wire (twisted two conductor wire with an electric drill).

    Posted on 9/6/2011

    Review of 7020a Review by RALPH
    Review of 7020a

    Everything was very satisfactory

    Posted on 6/2/2010

    Review of 7020a Review by STEPHEN
    Review of 7020a

    I found this temp sensor very easy to install and calibrate. But when compared to an alcohol thermometer placed next to it, the temperatures differ by 2-4 degrees, despite my calibrating the probe with the Sensaphone calibration (+ or -) feature.

    Posted on 1/14/2010

    Review of 7020a Review by GARY
    Review of 7020a

    very accurate temp probe. easy to intstall

    Posted on 12/5/2009

    Review of 7020a Review by JEFF
    Review of 7020a

    I have had a few fail, but smarthome has been good at replacing. Lets see how long this one holds up.

    Posted on 12/12/2008

    Leave a Review

    Only registered users can write reviews. Please, log in or register

  • •  Owner's Manual
  • •  1x - Probe
    •  1x - 12 foot, 24-gauge wire (pre-connected to Probe)

Please wait...