SECO-LARM SD-997BQ Fail-Safe Electric Deadbolt, 12VDC

SECO-LARM SD-997BQ Fail-Safe Electric Deadbolt, 12VDC

Add Hidden Security and Convenience with an Electrical Deadbolt
  • Designed for concealed placement in most hollow metal doors
  • Fail-safe operation (unlocks if power is lost)
  • Adjustable door lock delay timer
  • Stainless steel construction and bolt



List Price: $209.99

Your Savings: $103.32

REWARDS: 106 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Seco-Larm Fail-Safe Electric Deadbolt can be used with your alarm system or through your intercom system to allow entry access control at the home or at the office. It can also be wired in with a digital keypad near the door to assure high security without the need for a key. The device has an open/close monitor that recognizes normally open (NO), closed (C), or normally closed (NC) status. An adjustable door lock delay timer will allow you to set the desired time in seconds before the door re-locks. A solenoid with automatically shut off if the door is not closed properly to prevent burning out. Fail-safe operation will unlock the door if power is lost. This product requires a 12VDC Power Supply, sold separately.

    Also available in a fail-secure version that locks when power is lost.

    Note: This product is not recommended for wooden door frames. However, the door can be wood or metal.

    If the door can be opened when the power has failed to a door strike or deadbolt, we call this "Fail Safe." This means that people can come and go as needed when there is no power energizing a door. Fail-safe deadbolts are important on egress doors where people can be expected to leave a building during an emergency, such as a power outage.

  • Specifications

    Manufacturer: SECO-LARM
    Manufacturer Product No.: SD-997BQ
    Construction.: Stainless Steel
    Power Supply: 12V DC
    Current Draw: 360mA (standby), 900mA (activated)
    Adjustable Delay Timer: 0, 2.5, 5 and 9 seconds
    Dimensions: Lock body faceplate 7 7/8" x 1 5/16" (200 x 32mm), lock body cavity 5 3/4" x 1 1/8" x 1 1/2" (145 x 28 x 38mm), strike plate 3 9/16" x 1" x 1 1/8" (90 x 25 x 3mm)
    Bolt size: 5/8" diameter, 5/8" throw
    Certifications: CE

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • Lock body
    • Faceplate
    • Strike plate
    • 2 large mounting tabs
    • 2 small mounting tabs
    • 6-pin connector
    • Templates
    • Mounting screws
    • Installation guide

Please wait...