SECO-LARM Enforcer SK-910RA Enforcer Miniature 1-Channel RF 3 Amp Receiver

SECO-LARM Enforcer SK-910RA Enforcer Miniature 1-Channel RF 3 Amp Receiver

Compact Wireless Receiver Adds RF Remote Control to Any Device
  • Compatible with all SECO-LARM Enforcer 315MHz transmitters
  • Use to control garage door, lights, alarm control panel, or other devices via remote control
  • 3 Amp, Form "C" relay contact
  • Can learn the codes of up to 15 different transmitter buttons
  • Accepts ENFORCER fixed code or CODEBUMP transmitters



List Price: $44.99

Your Savings: $20.90

REWARDS: 24 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • If you have a home, office or storefront that needs to remain secure by only granting entry to authorized people, the SECO-LARM Enforcer Miniature 1-Channel RF Receiver can be part of the solution. The receiver will work with most SECO-LARM transmitters, sold separately, to remotely trigger a relay based device such as electronic/magnetic door strikes, also sold separately. The receiver will also work with most home security vehicle alarm systems, letting you easily add wireless RF control to almost any relay based device up to 3 Amps. By using a transmitter with this receiver, you can unlock or secure doors, control house lights or garage door remotely and can even be used to arm or disarm a vehicle alarm and open or close a garage door. It will work with up to 15 different transmitter buttons and also has a CODEBUMP security built -in to prevent criminals from "learning" your codes. This wireless receiver lets you be the decision maker, by letting you add RF remote control to almost any electronic device or system in your home or vehicle.

    Output Modes

    The Enforcer Miniature 1-Channel RF Receiver's relay output can be programmed for one of four different modes, depending on the application: 4-second momentary, 1-second momentary, toggle, and latch. Up to 15 different transmitter buttons can be programmed to each 1-Channel RF Receiver, so every member of your household can access the RF remote control feature.

    CODEBUMP® Security

    With SECO-LARM's CODEBUMP, so-called code grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 18 quintillion (1.8 x 1019) codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.
  • Specifications

    Manufacturer Product No.:SK-910RA
    Range:Up to 500'
    Operating Voltage:11-24 V AC / DC (24 VAC/DC must cut LP4)
    Memory Capacity:15 transmitter button codes per channel
    Current Draw:5mA standby, 50mA LED flashing @ 12VDC
    Output Mode:Programmable 4-sec. momentary (default), 1-sec. momentary, toggle (ON/OFF), or continuous
    Output Type:3A Form 'C' relay (normally open, normally closed, common)
    Dimensions:3 3/16" x 2 9/16" x 3/4" (80 x 65 x 19 mm)
    Frequency: 315MHz

  • 4 Reviews

    Review of 70421 Review by ROBERT
    Review of 70421

    Works quite well.

    Posted on 12/6/2011

    Review of 70421 Review by ROBERT
    Review of 70421

    Great little device. Decent range. Would be nice if you didn't need to take the case off to add/remove connections.

    Posted on 12/3/2011

    Review of 70421 Review by JEFFREY
    Review of 70421

    Works great. Range is lower than rated when using inside a wood cabinet.

    By connecting this to an electronic lock, and with the remote I also purchased, I now have a hidden lock that is remote controlled lock on a cabinet. Great way to add a lock to a standard armoire cabinet w/o cutting in to the exterior.

    Posted on 8/31/2011

    Review of 70421 Review by TOM
    Review of 70421

    very poor reception of only 5 feet

    Posted on 11/7/2010

    Leave a Review

    Only registered users can write reviews. Please, log in or register

  • 1x - Enforcer Miniature 1-Channel RF Receiver, 3A

    1x - Owner's Manual

Please wait...