RCI 9212i Interior Use Stand-Alone Keypad

RCI 9212i Interior Use Stand-Alone Keypad

Ideal Keypad for Access Control or Other Applications Requiring Momentary Control Inputs
  • Indoor use only
  • Flush mount design
  • 3 LED's for visual indication
  • Single gang design
  • Up to 4 independent outputs assignable by code
  • All outputs programmable for latched or timed operation
  • Keypad programmable
  • Stainless steel faceplate
  • Field selectable 12-24 VAC/VDC
  • 120 user capability
  • 2 year limited manufacturer warranty



List Price: $190.00

Your Savings: $71.95

REWARDS: 118 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • Designed to meet the needs of lighter volume access control environments, the 9212i's flush mount design is intended for indoor use only, and can accommodate up to 120 users. Operation status and PIN entry confirmation are visually indicated by the 3 LED's located on the keypad. Each key-press is acknowledged by a momentary illumination of the Yellow LED. The Red LED is on when the keypad is receiving power, and the Green LED is on while the relay is activated. LED or sounder guidance will aid in the programming which is accomplished entirely from the front of the keypad. Since this unit has a non-volatile memory, you will never need to worry about the keypad losing it's programming.

    For indoor or outdoor applications, use RCI 9212iLW

    The RCI Keypad allows up to 120 individual users codes to be valid at one time. These 120 users can then use their 1-6 digit code to activate the main relay as well as the auxiliary outputs depending on how the keypad is programmed. Aside from user's codes any of the relays can be activated through remote triggering by using a momentary closure on the normally open Remote Triggering Input. Each output is capable of being individually timed from 1 to 90 seconds or act as a toggle switch. Outputs may be triggered individually or in combination by any user code. The main relay is a form C relay tough enough to handle virtually any low-voltage equipment or electronic locking device. The keypad's active output can energize accessories such as lighting, or CCTV cameras whenever a key on the keypad is touched.

    • Commercial
    • Office Buildings
    • Warehouses
    • Industrial
    • Residential
    • Healthcare Facilities

    • Memory: Non-volatile EEPROM memory
    • Main Relay: Form C relay, 5A @ 24VDC, 10A surge
    • Auxiliary Outputs: 50mA negative voltage, Individually timed 1-90 Seconds/Toggle Switch
    • Operating Voltage: Field Selectable 12-24 VAC/VDC
    • Dimensions: 2-3/4" x 4-1/2" x 1-1/4" (69.8 x 114.3 x 31.8mm)
    • Current Rating: @12VDC 8mA typ - 35mA w/ relay energized, @ 24VDC 16mA typ - 45 mA w/ relay energized
    • Temperature: -20°F to 130°F (-28°C to 54°C)
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 9212i Keypad
    • Ten (10) Conductor Wiring Harness (1)
    • Slotted Screws (2)
    • Four (4) Conductor Wiring Harness (1)
    • Features & Programming Guide

Please wait...