Radio Design Labs EZ-VM22E VGA/XGA Switcher/Equalized Amplifier, 2x2

Radio Design Labs EZ-VM22E VGA/XGA Switcher/Equalized Amplifier, 2x2

Freely Switch 2 Sources and 2 Monitors with No Signal Loss
  • Ideal weight and size for portable computer case
  • All selector switches easily accessible on front-panel
  • Inputs and outputs on HD15 female connectors
  • Two front-panel switch-selectable inputs
  • Wide RGB bandwidth > 400 MHz loaded
  • High resolution compatibility VGA through QXGA



List Price: $219.55

Your Savings: $52.09

REWARDS: 167 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The EZ-VM22E is a high-resolution computer video source selector and distribution amplifier with two inputs and two outputs. A front-panel switch selects between the inputs. Each input has an associated ID BIT switch to assure compatibility with various computers. The sync for input 1 is front-panel switch-selectable between standard TTL or 75 Ohm video. One of the two outputs is indivually buffered for driving the computer monitor. The second output is driven by separate output amplifiers that include rear-panel gain and equalization trimmers that provide adjustable compensation for quality monitor cable lengths exceeding 100 m (300 feet). All switched functions are easily accessible on the front panel. Input switching is fully solid state for long-term reliable immunity from switch noise and the bandwidth limitations of mechanical switches. The EZ-VM22E is used in houses of worship, restaurants, clubs, meeting rooms, educational facilities, conference rooms, stores and commercial A/V systems.

    • Solid-State Switching of Video and Sync Signals
    • Reliable Full-Size Switches for Switched Functions
    • Switch-Selectable TTL or Video 75 O Input Sync
    • Front-Panel ID Bit Selection for Each Input
    • DC RGB Coupling, Output Polarity and Offset Follow Input
    • Rear-Panel GAIN and EQ Peaking Trimmers
    • Inputs (2): VGA - QXGA RGBHV or RGB with combined sync
    • Outputs (2): LOCAL MONITOR (1, Buffered, ID bit pass-thru to INPUT 1), MONITOR (1, with GAIN and EQ trim)
    • Gain: Unity (LOCAL MONITOR output), Unity to +6 dB (MONITOR output)
    • Equalization (peaking): None (LOCAL MONITOR output), Adjustable 0 to +8 dB at 50 MHz (MONITOR output)
    • Video bandwidth: > 400 MHz
    • Output offset: 5° mV typ. (75 O load)
    • Video impedance: 75 O (Input and output)
    • Sync (HV) input: 500 O TTL or 75 O Video (Switch-selectable), 0.7 V to 5 V p-p; Sync (HV) output: 5V TTL
    • Sync (HV) Propogation Delay: < 4 nS typ.
    • Sync (HV) Rise Time: < 4 nS typ.
    • Sync (combined): Output follows input
    • Bit Control: Switch-selectable (individual selector per input, pin 4, over-rides LOCAL MONITOR jack ID bit pass-thru)
    • 24 Vdc power supply current: 70 mA (idle), 80 mA (max.)
    • Power supply input voltage: 100 to 240 VAC
    • Warranty: 3 Years; contact RDL technical support department for assistance
    • Case dimensions: 5.75" (14.6 cm)W x 5" (12.7 cm)D
    • Mounting size: 1/3 rack width

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • EZ-VM22E unit
    • Power supply

Please wait...