Description
When planning the electrical wiring for your home or business, avoid adding too many wall switches in a single location. Wall switches ganged together cause homeowner confusion and can quickly ruin the aesthetic of a room. Instead consider adding a single Insteon keypad to control all the lighting. It's easy when combined with Insteon DIN Rail products.
Use of DIN rails is common overseas and in US commercial/industrial buildings. Because of their ease of installation, DIN rails are becoming more popular in the US. DIN rail products provide integrators and builders a more custom and organized way to handle complicated wiring circuits.
The DIN Rail On/Off clips directly onto a 35mm DIN rail and wires to load, power and neutral. Link it to an Insteon keypad or any other Insteon device for full remote control over the module and it's connected load. Specifically, DIN Rail On/Off is compatible with the "Top hat rail EN 50022" (sometimes referred to as a Type O or Type Ω) The DIN Rail On/Off will fit either variation of this style DIN rail (either 15 or 7.5 mm "high" off the mounting surface).
What's a DIN Rail?
It is simply a metal rail on which compatible products (circuit breakers, switches, etc.) can be snapped on. The DIN rail can simply be mounted to any flat surface (or even across studs). Please follow all applicable building and electrical codes whenever installing electrical products.
Optional Sense Wire Trigger
The DIN Rail On/Off features sense inputs for special applications where a local "dumb" switch might be necessary in addition to remote Insteon control. Sense inputs are compatible with latching, single momentary and dual momentary wall switches. Connect to any style wall switch to match any type of designer theme (antique, push-button, metal, etc.)
Local Control and Insteon Setup
The DIN Rail On/Off has a small paddle that operates exactly the same as the best-selling SwitchLinc paddles. So, you can turn the connected load on or off by tapping the paddle. Furthermore, a setup button is provided for setting up other properties as well as for linking and un-linking. Finally a dual-color (green and red) LED displays the on (green) or off (red) status of the connected load.
| General | |
| Manufacturer | Insteon |
| Manufacturer Product No. | 2453-222 - (Each) 2453-222-5PK - (5-Pack) |
| UPC | 813922019674 - (Each) 813922019674 - (5-Pack) |
| Safety Approval(s) | ETL |
| Certifications | FCC |
| FCC ID | SBPDR01 |
| Warranty | 2 Years |
| Insteon Features | |
| Operation Modes | Controller and responder |
| Maximum Links/Scenes | 400 |
| Load Brightness Levels | 32 locally (256 with software) |
| Status LED | Green when load is on, Red when load is off Blinks Red once when responder does not acknowledge/blinks Green once if all responders acknowledge (can be disabled via software) Blinks Green or Red during setup Blinks Red or Green (depending upon state of load) to indicate traffic (must be enabled via software |
| LED Brightness | Adjustable from off to 100% bright |
| Local Control | Yes |
| Commands Supported s Controller | On | Off Fast On | Fast Off Begin Brighten | End Brighten Begin Dim | End Dim |
| Commands Supported as Responder | On | Off Fast On | Fast Off Beep |
| Software Configurable | Yes |
| RF Range | 150 ft. (depending on your home’s construction) |
| Phase Detect Beacon | Yes |
| Insteon Device Category | 0x02 switched lighting control (all frequencies) |
| Insteon Device Subcategory | 2453-222 (915MHz) | 0x2E |
| Mechanical | |
| Mounting | 35mm (top hat) DIN rail |
| Wire Connections | N/A |
| Max. Cable Size | 4mm², 12 AWG (2.72mm diameter) |
| Min. Cable Size | 1.5mm², 15 AWG |
| Screw DIN Rail Connections | Line Neutral Load Sense 1 Sense 2 |
| Case Color | White |
| Set Button | Yes |
| Plastic | UV stabilized polycarbonate |
| Beeper | Yes |
| Beep On Button Press | Optional (off by default) |
| LED | 1 RGB |
| Dimensions(H x W x D) | 3.14" x 2.05" x 2.48" |
| Weight | 6.17 oz (175g) |
| Operating Environment | Indoors |
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Operating Humidity Range | 0-90% relative humidity |
| Storage Temperature Range | -4° to 158°F (-20° to 70°C) |
| Electrical | |
| Voltage | 100VAC to 240VAC |
| Frequency | 50/60Hz auto-detected at power-up |
| Load Type(s) | Resistive Inductive/capacitive Low voltage halogen |
| Maximum load | US 15A – 240VAC EU 16A – 240VAC AUS/NZ 10A – 240VAC 3600W/240VAC Resistive 700W/240VAC Inductive/Capacitive 2000W/240VAC Bulbs/Low Voltage Halogen |
| User Replaceable Fuse | Yes, (16 A (T)) 5x20mm fuse |
| Hardwired Remote Control | Yes, either latching or momentary switches supported |
| Retain All Settings Without Power | Yes, saved in non-volatile EEPROM |
| Standby Power Consumption | <1W |
- 1x - Insteon Din Rail On/Off
- 1x - Quick Start Guide
Customer Reviews
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.