Philio Z-Wave Smart 4-in-1Multi-Sensor

Philio PSM02 Z-Wave Smart 4-in-1 Multi-Sensor

Advanced Z-Wave Sensor Combining Funtionality of PIR and Door / Window Sensors
  • 4 in 1 sensor - Door/Window, PIR Motion, Illumination and Temperature
  • Uses the latest Z-Wave technology for communication
  • Supports multi-channel operation
  • Long communication range
  • Long battery life


REWARDS: 64 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Philio PSM02 Smart 4-in-1 Multi-Sensor features Z-Wave technology with the ability to monitor 4 types of activity - door/window opening and closing, PIR Motion, illumination and temperature. When used with other Z-Wave Devices or a Z-Wave Central Controller it can be used as a security device or home automation device to send an alarm or trigger an event. These events can be activate based on when a door or window has been opened or closed, motion is detected, ambient light is dark or light, or if the temperature exceeds a set threshold. The product consists of two elements - the detector and the magnet. Both must be used if you want to monitor a door or window, with the magnet mounted on the moving part of the window or of the door and the other part is placed on the frame.


    Z-Wave Communication   Four Sensors in One   CR123A Battery
    Newest Z-wave 400 series chip, supports multi-channel operation and higher data rate of 9.6/40/100kbps   Door/Window open/close monitor, PIR motion sensor between 6~10m, illumination detection of 0~500 lux, and temperature -10° C~70° C   Uses one 3V CR123A battery with and extended battery life expectancy of greater that 2 years


    Higher Output Power   Tamper Proof Protection   DIY Install
    Newest Z-wave 400 series chip, supports higher output power of +2.5dBm output power (as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range   A built-in tamper switch will instantly start an alarm when the device is forcibly removed   Easy setup process simply requires installation of included battery and mounting of the sensor and magnet using the pre-attached tape
  •  Specifications

     Brand  Philio
     Manufacturer Part Number  PSM02, PHL-DWMLT-PSM02-US
     Power  • Operating Voltage - (1x) 3V CR123A (Battery life - > 2 years)
     • Standby current - 48 uA
     • Operating current - 37mA
     • Low battery voltage - 2.6V
     Weight  52 g
     Dimensions (W x H x D)  • Detector 28 X 96 X 23 mm
     • Magnet. 10 X 50 X 12 mm
     Communication  Z-Wave V6.02 (newest Z-wave 400 series chip, support multichannel operation and
     higher data rate of 9.6/40/100kbps and higher output power of +2.5dBm output power
     as compared to -2.5dBm 300 series Z-wave module to enhance the communication
     Wireless Frequency  868.4 MHz RF
     Sensors  Door/Window, PIR Motion, Illumination, Temperature
     Door/Window Sensor Range  Magnetic contact, 28mm (Open to Close) and 30mm (Close to Open)
     PIR Motion Sensor Range  8~10m in 0° , 6~8m at 90°
     Illumination Detection Range  0 ~ 500 lx
     Temperature Detection Range  -10° C ~ 70° C
     Low Battery Indicator  Yes
     Auto Report Open/Close Status and Battery Status  Yes
     Certifcation  • Z-Wave Certificated ZC08-13050003
     • FCC part15.249 / EN300 220-1/ certification
     • NCC
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

  • •  Owner's Manual
  • •  1x - Z-Wave Smart 4-in-1Multi-Sensor
    •  1x - CR123A battery
    •  1x - Owner's Manual

Please wait...