Patio Pacific 04PP10 1 Endura Flap Pet Door for Walls with Single Flap, #10 Large


Patio Pacific 04PP10 1 Endura Flap Pet Door for Walls with Single Flap, #10 Large

Extreme Performance Pet Door is Safe for Pets and Keeps your Home Sealed from the Outdoor Elements
  • Designed for large dogs
  • Self-Framing for all walls
  • Beefy aluminum frame construction
  • Sturdy Locking Cover
  • High Aspect Ratio design
  • Provision to add magnets
  • Environmentally friendly 'Green' flap material



List Price: $361.00

Your Savings: $32.00

REWARDS: 329 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The heart of any pet door is the flap, and pet door flaps have always been a big disappointment to the pet door owner. They leak, they don't insulate, they pinch the pet, they blow open, they don't fit the pet and they wear out quickly so the user needs to buy an expensive replacement flap and start over again. Until Now! The award winning Endura Flap Pet Door for Walls is the premium solution for adding a pet door to your home. If you've never owned a pet door before, you're going to be very satisfied - it does everything you think it should. But if you have ever owned a pet door, hold on to your socks. You're not going to believe how much better this is that what you've had in the past.

    Advantages of Installing a Pet Door in a Wall
    You may have no other convenient locations for your pet door in which case it's handy to know that the wall is an option. A pet door in a wall can always accommodate a double flap which will always insulate, seal and stand up to wind better than a single flap. If you want to remove the pet door at some future date (say you sell the house and the buyer doesn't want the pet door) and you've installed the pet door in a door, then you'll be buying a new door which can be expensive. On the other hand, depending upon the type of construction, a pet door in a wall may be removed and the wall patched inexpensively.

    The standards which the Endura Flap Pet Door is built, and no other pet door is, are as follows:
    • Be flexible and safe
    • Seal tightly against weather - Insulate like dual pane glass - Not yellow in the sun
    • Last 'forever' - Remain flexible in very low temperatures - Have appropriate dimensions
    • Stand up to wind - Be visually clear - Be environmentally friendly
    • Reflect superb engineering - Be Made in the USA
    • For a detailed description of these features, click here.

      Endura Flap Pet Doors for Walls are available in 4 different sizes with either a single or double flap:
    • Single Flap or Double Flap #06 Small
    • Single Flap or Double Flap #08 Medium
    • Single Flap or Double Flap #10 Large
    • Single Flap or Double Flap #12 Extra Large
    • To ensure the correct size for your application, click here for the Endura Flap Pet Door for Walls sizing chart.

      Please Note: Endura Flaps are not recommended for use by kittens or very small dogs. Cats have been successful using the #06, however a few have found the #08 difficult to use. We would not recommend using the #10 or #12 or any of the double flap versions for cats.

      Important Note: Don't confuse these with self-framing door mounts! The adjustment range for a self-framing wall mount must be much greater then for a door mount.

    Choosing Between a Single Flap or Double Flap
    An important consideration in a wall mount pet door is whether to have a single flap or a double flap (flap on both sides of the wall). The air-space between the two flaps of a double flap wall mount will insulate much better than a single flap pet door and the double flaps will stand up to wind much better also. Finally, it will look more finished to have the flap on both sides of the wall.

  • Specifications
    Manufacturer Patio Pacific
    Manufacturer Product No. 04PP10 1
    UPC 873653002840
    Flap Size 10" x 19"
    Rough Cut 12 1/2" x 23"
    Outside Frame Dimensions 13 9/16" x 23 5/8"
    Manufacturing Location 100% Designed, Engineered and Manufactured in the USA
    Manufacturer Warranty 90 day return, 10 year warranty, 15 year warranty on the "Endura" flap assembly

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Flap Frames
    • 1x - Trim Frame
    • 8x - Hole Plugs
    • 4x - 1 3/4" screws
    • 4x - 2 1/4" screws
    • 4x - 2 3/4" screws
    • 2x - Weather strips
    • 1x - Warranty Information
    • 1x - Installation Template

Please wait...