Panamax MR5100 Home Theater Power Management System

Rest Assured Knowing that your Home Theater Investment is Surge Protected
  • 11 protected and filtered power outlets and USB Charging (0.5V/5V)
  • Exclusive Automatic Voltage Monitoring (AVM) and Protect of Disconnect Technology
  • Power Sequencing (1 Always On bank, 1 Switched bank, 1 Delayed high current bank)
  • Antenna, Cable, or Satellite and LAN signal protection
  • Linear level 4 filtration (3 total isolated banks) with dedicated high current outlet bank (4 outlets)


  • Details
  • Specs
  • Reviews
  • What's Included
  • The MR5100 is part of Panamax's MR famliy of products that offers several layers of surge protection. Panamax's patented Automatic Voltage Monitoring (AVM) technology continuously monitors the incoming power. In case of an undervoltage or brownout (too little electricity) or an overvoltage (too much electricity) a flashing red lightning bolt will be displayed and power to the equipment is automatically turned off. When voltage returns to a safe level, power to the equipment is automatically reconnected.

    The other layer of surge protection Panamax offers is our exclusive Protect or Disconnect® technology. This ultra fast protection circuitry completely protects your equipment from surges such as lightning. When overwhelmed with extreme catastrophic events, Panamax permanently disconnects AC power to equipment. All Panamax products offer this core protection technology.

    Protecting a complete system may sometimes require that signal wires coming out of the wall be protected as well. Panamax has you covered there too. Universal ultra low-loss coaxial protection (as well as LAN/Ethernet) protection prevents signal lines from carrying damaging surges while maintaining full high-definition and high-speed Internet signals to your equipment for your connected life.

  • Specifications
    Manufacturer Panamax
    Manufacturer Product No MR5100
    UPC 050616008945
    Voltage Protection Rating 330V
    Under-Voltage Shutoff 95V +/- 2V
    Thermal Fusing Yes
    Single Pulse Energy Dissipation 2025 Joules
    Response Time < 1ns
    Protection Modes L-N, L-G, N-G
    Protect or Disconnect Circuitry Yes
    Peak Impulse Current 52,000 amps
    Over-Voltage Shutoff 135V +/- 2V
    Line Voltage 120V, 50/60Hz
    Initial Clamping Level 200V Peak, 141VRMS
    Automatic Voltage Monitoring Circuit Yes
    Linear Level 4 Noise Filtration Bank 1 & 2:
    -65dB min @ 100 kHz
    -65dB @ 250 kHz
    -45dB min @ 500 kHz
    Max Filtration: -80dB @ 150 kHz

    Bank 3 - High Current, Low Impedance:
    -50dB min @ 100 kHz
    -60dB min @ 250 kHz
    -45dB min @ 500 kHz

    Bank-to-Bank (1 vs 2) Noise Isolation:
    -60dB min @ 100 kHz
    -65dB min @ 250 kHz
    -50dB min @ 500 kHz
    Max Filtration: -75dB @ 125 kHz
    LAN Wires Protected 8-Wires
    LAN Jacks RJ-45
    LAN Compatibility 10/100/1000bT
    LAN Clamping Level 62V +/- 6V @ 1 mA
    Coax Shielded Yes
    Coax Insertion Loss <0.5dB
    Coax HD 1080i/p Ready Yes
    Coax Frequency Range 0 MHz - 2.2 GHz
    Coax Clamping Level 75V
    TEL Wires Protected 2 Wires, 1 Pair (4, 5)
    TEL Jacks RJ-11
    TEL Fuseless/Auto-Resetting Yes
    TEL Clamping Level 260V
    Weight 13.5 lbs
    Rack Ears Included
    Dimensions 12" L x 17" W x 4" H (with feet)
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - MR5100 Home Theater Power Management Surge Protector
    • 1x - Rack Mounting Kit
    • 1x - Owners Manual

Please wait...