Wireless Cable TV

Imagine having hi-fi music in every room of your home with nothing more than an elegant Wall-Mounted Keypad and virtually invisible in-wall or in-ceiling Speakers showing. This is the dream system of interior decorators and is typically only found in multi-million dollar homes. We can show you how this can be done in your home with your existing equipment and at a reasonable cost.


Wireless audio/video (AV) systems consist of two main parts: a Transmitter and a Receiver. The Transmitter uses a wired connection (most commonly via Composite RCA cables or HDMI cables) with the AV output from a source component such as a cable box, satellite receiver, DVD player, Blu-ray Player, DVR, Roku, or Apple TV. The Receiver uses a wired connection with the AV input(s) on a TV. Once the Transmitter and Receiver are installed the AV signals are sent from a source component out to the Transmitter, wirelessly on to the Receiver and out to the TV. Typical applications for this setup are when the Receiver may be located inside a cabinet, in an entertainment rack, behind closed doors or in another room; and/or the TV is located where a wired connection is not possible or may just simply be an eyesore, like a flat panel wall mount application. Without the need to make long AV wire connections you can place your devices almost anywhere.

Distribute High-Definition Signals Over Cat. 5 Wiring

Changing Channels Remotely

A common question with a wireless setup like this is how to change channels if the source component is in another room or in a location without a line of sight to the IR remote. Fortunately most systems include a built-in IR pass-through system. The Receiver features an infrared (IR) receiver, that takes in a signal from your IR remote and passes it wirelessly to the Transmitter and out to an emitter that repeats the IR signal to the source component. If the wireless solution doesn't include an IR pass-through, or if a little more discrete installation is needed, consider one of Smarthome's many IR Repeater Kits.

Wireless Frequency

It is also important to understand the frequency that the wireless system uses. Almost every home today is operating on at least one, if not multiple, wireless systems - wireless home automation, phones, doorbells, intercoms, security systems, sensors, speakers and more. Many of these use lower end frequencies, which you will commonly see as a specification of 314 MHz, 433 MHz or 900 MHz. More recently higher end bandwidths have been used, which you will see as a specification of 2.4 Ghz or 5.8 Ghz. The frequency of the device doesn't necessarily correlate to the quality of the product. The important thing to understand is that you want to try and make sure there aren't multiple products using the same frequency, as this can cause interference and decrease the reliability of the products. Ideally, you will want to be using different frequencies for each set of products to ensure the optimal results of your installation.