Specifications
| General | |
| Manufacturer | Insteon |
| Manufacturer Product No. |
2477SA1 - Normally Open 2477SA2 - Normally Close |
| UPC | 813922010374 |
| FCC ID | SBP2477SA |
| Patent No. | U.S. Patent No. 7,345,998, Foreign Patents (See Insteon.com) |
| Color | Gray |
| Dimensions | 8.6" H x 4.5" W x 2.5" D (21.8 cm H x 11.4 cm W x 6.4 cm D) |
| Dimensions | Gray |
| Weight | 1.40 lbs |
| Warranty | 2 Years |
| Operation | |
| Local Control | Yes |
| Load Sense | No |
| Power Restore | Yes |
| Application LED(s) | Load Active (LED follows relay) |
| Field Upgradable Support | No |
| Operating Environment | Indoor |
| Operating Temperature Range | 32° F to 104° F (0° C to 40° C) |
| Operating Humidity Range | 0-85% Relative Humidity |
| Insteon Features | |
| Insteon Addresses | 2 hard-coded (1 for Access Point, 1 for Relay) |
| Maximum # of Controller Groups | 1 |
| Maximum # of Responder Groups | 1 |
| Insteon Links (max) | 417 (total of controller and responder) |
| Insteon All-Link Support | Yes |
| Insteon Multi-link Support | No |
| Insteon Unlink Support | Yes |
| Insteon Multi-unlink Support | No |
| Insteon PLC (Powerline Carrier) | Yes |
| Insteon RF | Yes |
| Insteon Powerline Minimum Transmit Strength | 3.2 Vpp into 5 Ohms |
| Insteon PowerLinc Maximum Sensitivity | 10 mVPP nominal |
| Insteon RF Ranage | >100' (depending on your home’s construction) |
| Insteon Messages Repeated | Yes |
| Insteon Controller | Yes |
| Insteon Responder | Yes |
| Electrical | |
| Input Power Voltage | 220/240 Volts (+/- 10%) - Two 120-Volt split-single phase electrical lines |
| Input Power Voltage Type | AC |
| Input Power Voltage Phase Type | Split, single phase - connections only to leg A and leg B (no neutral connection) |
| Input Power A/C Frequency | 60 Hz |
| Controllable Device Types | All Insteon Responders |
| Certification | Safety tested for use in USA and Canada (ETL #3193579) |
| FCC ID | SBP2477SA |
| Industry Canada | 5202A-2477SA |