Specifications
General | |
Manufacturer | Insteon |
Manufacturer Product No. | 2477DH - White (Each) 2477DH-5PK - White (5-Pack) |
UPC | 813922011005 - White (Each) 813922019629 - White (5-Pack) |
Patent No. | |
Certification | Safety tested for use in USA and Canada (ETL #3017581) |
Operation | |
On-Levels | 32 locally, increments of 1% with software |
Ramp Rates (full-ON to full-OFF) | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely |
LED Indicator | 9 White LEDs, Optional Green, Blue, Amber, or Red with item 2400L Kit |
Operation Modes | Insteon |
Multi-Way Circuit Support | One SwitchLinc Dimmer controls load, Cross-Link any number of SwitchLinc Dimmers or other Insteon Controllers |
Setup Memory | Non-volatile EEPROM |
Insteon Features | |
Insteon Addresses | 1 hard-coded out of 16,777,216 possible |
Insteon Links | 417 |
Insteon Powerline Frequency | 131.65 kHz |
Insteon Minimum Transmit Level | 3.2 Vpp into 5 Ohms |
Insteon Minimum Receive Level | 10 mV |
Insteon Messages Repeated | Yes |
Radio Frequency | 915 MHz |
Ramp Rates (full-ON to full-OFF) | 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely via software |
Mechanical | |
Paddle Type | True rocker action |
Color | - |
Wire Nuts | 4 |
Mounting | Mounts in a single or multiple-ganged junction box. Control 200 W less load for each immediately adjacent Dimmer Switch installed. For example, 600 W load control becomes 400 W with another dimmer to the immediate right or left. Use a triple-gang box with a mechanical switch in the center to avoid de-rating. |
Operating Conditions | Indoors, 32 to 104° F, up to 85% relative humidity |
Dimensions | 4.1" H x 1.8" W x 1.2W" D |
Weight | 3.6 oz |
Electrical | |
Supply Voltage | 100-277 Volts AC +/- 10%, 50/60 Hertz, single phase |
Neutral Wire | Required |
Power Wire Leads | 6", 18 AWG, stranded,600V, 105° C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white) |
Maximum Amps | 8 amps |
Ground Lead | 6", 18 AWG, stranded, bare copper |
Load Types | Wired-in incandescent lighting devices |
Maximum Load | 1000 Watts |
Power Consumption | 0.56 Watts |
Heat Dissipation | Four heat dissipation fins integrate into the body of the switch. Individual fins can be permanently detached from the switch if fins interfere with installation. Removal of each individual fin will reduce rated switch capacity by 100W. |