General
Manufacturer Insteon
Manufacturer Product No. 2475DA2 - (Each)
2475DA2-5PK - (5-Pack)
UPC 813922011432 - (Each)
810026640469 - (5-Pack)
Patent No. U.S. Patent No. 7,345,998. Protected under U.S. and foreign patents (see www.insteon.com)
Safety Approval(s) FCC 15.107, 15.109, 15.249
RSS 210
EN 300 220-2, 301 489-3
AS/NZS 4268, CISPR 22
UL 508
CSA C22.2#14
IEC 60669-2-1
FCC ID SBP2475DA2
Warranty 2 Years
Insteon Features
Insteon ID 1
Operation Modes 400 responder groups and 1 controller group
Maximum Scene Memberships 400 (Combined Controller + Responder)
Insteon Device Category 0x01 Dimmable Lighting Control (All Frequencies)
Insteon Device Subcategory 2475DA2 (915MHz | 0x25
Status LED Green when load is on, red when load is off
Local On-Level (Dimming Mode) Adjustable, 32 fixed brightness levels or resume dim
Local Ramp-Rate (Dimming Mode) Adjustable from 0.1 seconds to 9 seconds locally (0.1 seconds to 9 minutes via software)
Local Control Yes
Commands Supported as Controller On
Commands Supported as Responder On | Off
Fast On | Fast Off
Begin Bright | Being Dim
End Bright | End Dim
Incremental Bright | Incremental Dim
Software Configurable Yes
RF Range 150 ft. (depending on your home’s construction)
Phase Detect Beacon Yea
Mechanical
Mounting Behind switch or outlet, or above light fixture in a single-gang electrical box
Wire's Analog + 0-10V Control (Gray wire)
Analog - 0-10V Control (purple wire)
Line
Neutral
Load 1
Load 2
Set Button 1
Beeper Yes
Beep On Button Press Optional (off by default)
LED 1, Green/Red
Set Button Yes
Plastic UV stabilized polycarbonate
Beeper Yes
Dimensions 171mm (wide), 30mm (high), 35mm (deep)
6.75-in. (wide), 1.2-in. (high), 1.4-in. (deep)
Weight 5.1oz
Operating Environment Indoors
Operating Temperature Range 32° F to 104° F (0° C to 40° C)
Operating Humidity Range 0-90% relative humidity
Storage Conditions -4° F to +158° F (-20° C to 70° C)
Case Color White
Plastic UV stabilized polycarbonate
Electrical
Voltage 100-277VAC ± 10%
Frequency 50Hz/60Hz
Maximum Load 0-10VDC for connection to dimmable ballast
Load 1; 100 to 277VAC / 5Amps
Load 2; 100 to 277VAC / 5Amps
Hardwired Remote Control RJ-10 Mini-modular jack four conductor
Hardwire Port Wiring Pin 4
(Left side) | Pin 3 | Pin 2 | Pin 1
(Right side)
Ground | Group 1-2 | Group 3-4 | 12-15VDC
Hardwire Port Triggering Group 1: triggers when switch between Pin 3 & 4 is closed
Group 2: triggers when switch between Pin 3 & 4 is opened
Group 3: triggers when switch between Pin 2 & 4 is closed
Group 4: triggers when switch between Pin 2 & 4 is opened
Retains All Settings Without Power Yes, saved in non-volatile EEPROM
Load Type(s) Wired in ballasted dimming and non-dimming lighting loads
Standby power consumption < 1 Watt