Manufacturer Insteon
Manufacturer Product No. 2453-222 - (Each)
2453-222-5PK - (5-Pack)
UPC 813922019674 - (Each)
813922019674 - (5-Pack)
Safety Approval(s) ETL
Certifications FCC
Warranty 2 Years
Insteon Features
Operation Modes Controller and responder
Maximum Links/Scenes 400
Load Brightness Levels 32 locally (256 with software)
Status LED Green when load is on, Red when load is off
Blinks Red once when responder does not acknowledge/blinks
Green once if all responders acknowledge (can be disabled via software)
Blinks Green or Red during setup
Blinks Red or Green (depending upon state of load) to indicate traffic (must be enabled via software
LED Brightness Adjustable from off to 100% bright
Local Control Yes
Commands Supported s Controller On | Off
Fast On | Fast Off
Begin Brighten | End Brighten
Begin Dim | End Dim
Commands Supported as Responder On | Off
Fast On | Fast Off
Software Configurable Yes
RF Range 150 ft. (depending on your home’s construction)
Phase Detect Beacon Yes
Insteon Device Category 0x02 switched lighting control (all frequencies)
Insteon Device Subcategory 2453-222 (915MHz) | 0x2E
Mounting 35mm (top hat) DIN rail
Wire Connections N/A
Max. Cable Size 4mm², 12 AWG (2.72mm diameter)
Min. Cable Size 1.5mm², 15 AWG
Screw DIN Rail Connections Line
Sense 1
Sense 2
Case Color White
Set Button Yes
Plastic UV stabilized polycarbonate
Beeper Yes
Beep On Button Press Optional (off by default)
Dimensions(H x W x D) 3.14" x 2.05" x 2.48"
Weight 6.17 oz (175g)
Operating Environment Indoors
Operating Temperature Range 32° to 104°F (0° to 40°C)
Operating Humidity Range 0-90% relative humidity
Storage Temperature Range -4° to 158°F (-20° to 70°C)
Voltage 100VAC to 240VAC
Frequency 50/60Hz auto-detected at power-up
Load Type(s) Resistive
Low voltage halogen
Maximum load US 15A – 240VAC
EU 16A – 240VAC
AUS/NZ 10A – 240VAC
3600W/240VAC Resistive
700W/240VAC Inductive/Capacitive
2000W/240VAC Bulbs/Low Voltage Halogen
User Replaceable Fuse Yes, (16 A (T)) 5x20mm fuse
Hardwired Remote Control Yes, either latching or momentary switches supported
Retain All Settings Without Power Yes, saved in non-volatile EEPROM
Standby Power Consumption <1W