Manufacturer Insteon
Manufacturer Product No. 2443-222
UPC 813922012767
Warranty 2 Years
Insteon Features
Insteon Controller and responder
Maximum Links/Scenes 400
Load Brightness Levels 32 locally (256 with software)
Status LED Green when load is On | Red when load is Off
Blinks Red once when responder does not acknowledge | blinks Green once if all responders acknowledge (can be disabled via software)
Blinks Green or Red during setup
Blinks Red to indicate traffic (must be enabled via software)
LED Brightness Adjustable from off to 100% bright
Local control Yes
Commands Supported As Controller On | Off
Fast On | Fast Off
Begin Brighten | End Brighten
Begin Dim | End Dim
Commands Supported As Responder Open (On) | Close (Off)
Fast On | Fast Off
Begin raise (Brighten) | End raise (Brighten)
Begin lower (Dim) | End lower (Dim) Beep
Software Configurable Yes
RF Range 150 ft. (depending on your home’s construction)
Phase Detect Beacon Yes
Insteon Device Category 0x0E window coverings
Insteon Device Subcategory 2444-222 (915MHz) | 0x01
Mounting Behind switch or above light fixture in single-gang electrical box
Wire Connections Sense 1 (yellow): 24 AWG, 0.205mm²
Sense 2 (purple): 24 AWG, 0.205mm²
Max. Cable Size 4mm², 12 AWG (2.72mm diameter)
Min. Cable Size 1.5mm², 15 AWG
Screw Clamp Connections Line
Load 1
Load 1(Second Terminal) Neutral
Case Color White
Set Button Yes
Plastic UV stabilized ABS+PC
Beeper Yes
Beep On Button Press Beeps when button is pressed or connected switch is tapped (must be enabled via software)
Dimensions (H x W x D) 1.8" x 1.8" x 0.6"
Weight 2.52 oz
Operating Environment Indoors
Operating Temperature Range 32° to 104°F (0° to 40°C)
Voltage 100VAC to 240VAC
Frequency 50/60Hz auto-detected at power-up
Maximum Load 8A Resistive
2.5A Motor
Load Types Resistive
Hardwired Remote Control Yes, dual momentary switches supported
Retain All Settings Without Power Yes, saved in non-volatile EEPROM
Standby Power Consumption <1W
Safety Approved ETL
Certifications FCC, UL, IEC, EN