Niles Audio SWA-500M Subwoofer Amplifier

Niles Audio SWA-500M Subwoofer Amplifier

Specifically Tuned Amplifier Works with Niles SW10WM and SW10JM Wall-Mount Subwoofers
  • 500 watt mono subwoofer amplifier is power matched for the SW10WM and SW10JM subwoofers
  • High-current design assures that even the most demanding program material is handled with ease
  • Front mounted level, phase and low-pass controls
  • 12V or music sense automatic turn-on/off
  • Automatically triggered movie modes


REWARDS: 799 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Niles Audio SWA-500M Subwoofer Amplifier is a Class D mono amplifier that offers up to 500 Watts of power and is designed to power up to two passive (non-powered) subwoofers - ideally the Niles Audio SW10JM 10-Inch Passive Joist-Mount Subwoofer and/or SW10WM 10-Inch Passive Wall-Mount Subwoofer (Each), each sold separately. When combined with high quality subwoofers, the SWA-500M will provide excellent bass reinforcement for home theater and home audio applications. Bass or low frequency effect (LFE) is a critical part of a well designed audio/video system - so installing the right amplifier for your subwoofer(s) will give you that thunderous, accurate bass that makes movies and music so exciting.

    You can set the desired bass level according to your personal taste for music and movies using the front mounted bass controls or a bass boost selector on the back. The amplifier is designed for home theater and home audio bass and can be placed on a sturdy shelf or mounted using the included rack ears. It can be turned on or off using the power switch on the back panel or it can turn on or off automatically via the 12V Power Trigger. Additionally, a Movie Mode trigger can be used to trigger a signal from a home theater surround processor or receiver to enable customized movie mode settings for automated audio or Dolby Surround Sound effects.

    For the best possible performance using the line-level connections, use high-quality RCA cables that feature low impedance and gold-plated connectors; such as a Vanco International Blue Jet Stereo RCA Audio Cable or a Vanco International Blue Jet RCA Subwoofer Cable, 6 Foot, each sold separately.

    About Class D Amplifiers
    Class D amplifiers are beautifully efficient so you'll get a lot more power with less current. Less input current reduces power supply size and generates less waste heat. This process allows Class D amps like the SWA-500M to produce more power than amps of larger size. The SWA-500M Class D amplifier is designed specifically for bass reinforcement for passive (non-powered) subwoofers. The SWA-500M provides 500 Watts Continuous Output Power (<1% THD +N into 4 ohm). Because the SWA-500M's power output is dedicated to low frequency effects, you'll get the maximum performance your subwoofer(s) can provide.

  • Specifications
    Manufacturer Niles Audio
    Manufacturer Product No. SWA-500M Subwoofer Amplifier, FG01361
    UPC 760514013612
    Dimensions 3.5"H X 16 13/16"W X 14 1/4"D (with Rack Ears); 3.5"H X 19 13/16"W X 14 1/4"D (without Rack Ears)
    Continuous Output Power <1% THD +N Into 4 Ohms: 500 Watts S/N Ratio > 90dB
    Variable Low Pass Filter 12 DB Per Octave -3dB @ 40Hz Minimum Position -3dB @ 120H Maximum Position
    Fixed Low Pass Filter 6dB Per Octave -3dB @ 125Hz
    Variable High Pass Filter 12 DB Per Octave Selectable Switch Auto Turn On Sensitivity 3.0mV 50 Hz Input
    Delay Off Time 15-20 Minutes
    Power Requirements 120/230 Switchable
    Variable Line Level Output High Pass 12dB/Octave 3dB @ 60Hz Knob Full Counter Clockwise; 3dB @160Hz Knob Full Clockwise
    Manufacturer Warranty 2 Year Limited

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Amplifier
    • 1x - Rack mount kit and hardware
    • 1x - Owner's Manual

Please wait...