Niles Audio IRB1 High-Output IR Flasher

Niles Audio IRB1 High-Output IR Flasher

High Output IR Flasher for Hidden Equipment
  • Controls An Entire Stack Of Audio/video Components
  • High-power Output
  • Perfect For Mounting To The Inside Of A Cabinet Door Or At The Top Of An Equipment Rack
  • Adhesive Backing For Quick And Easy Mounting
  • Not Compatible With MSU140



List Price: $30.95

Your Savings: $11.96

REWARDS: 18 points
  • Details
  • Specs
  • Reviews
  • The IRB1 is a small, cabinet-mount high output infrared flasher. When an IR remote sensor receives a command from a hand-held remote control, it sends a corresponding electronic signal through a wire to the main system unit. Here, the main system unit cleans and amplifies the electronic signal. Finally, the main system unit outputs the signal to the IR flasher which relays the infrared command to the audio/video component you wish to control. The IRB1 relays the infrared command using flashes of infrared light in a powerful flooding pattern from its two infrared LEDs. The output is extraordinarily accurate over a wide bandwidth. This allows the IRB1 to control most makes and models of IR controlled audio/video components.

    Features and Benefits
    This IR Flasher offers:
    • Two infrared LEDs give the IRB1 exceptional range and power. With proper placement, a single IRB1 flasher can control an entire stack of audio/video components.
    • The IRB1 is equipped with a 3.5mm plug. This provides you with easy hookup.
    • An adhesive-backed strip is included with the IRB1, providing quick, secure, mounting.
    • The IRB1 is supplied with an ample 10' of connecting wire.

    • IR System: Compatible with virtually all brands of remotes using carrier frequencies between 20 and 455 kHz.
    • IR Transmitting Range: 18' to 30' if mounted so that the transmitting LEDs face the sensors in a direct line of sight.
    • IR Transmitting Angle: Variable with the brand and/or model of the audio/video component. Because of the high power and flooding pattern of the IRB1, extreme transmitting angles can be successfully used if the sensor window of the component is close.
    • Unit Dimensions: 1" Wide x 2" High x 3/4" Deep (Includes double sided tape).
    • Mounting Supplied with self-adhesive tape.
    • Wiring Requirements: Supplied with 10' of 2-conductor 22 gauge connecting wire and 3.5mm plug. Substitute an 18 gauge 2-conductor wire for distances ranging from 10 to 20' and a 16 gauge 2-conductor wire for up to 200'.
  • 3 Reviews

    Review of 6756ho Review by CHRISTOPHER
    Review of 6756ho

    These flashers are the best I have ever used. Niles' repeater system is way ahead of the competition. No delay whatsoever. These flashers actually reflect off the inside of the cabinet doors well enough to over 3 shelves worth of components. I am using a second one to the top to be sure to cover the fourth shelf since they aren't that expensive. The sensors are sure expensive, but other than that this is an awesome awesome awesome product.

    Posted on 4/28/2013

    Review of 6756ho Review by CHRISTOPHER
    Review of 6756ho

    The Niles remote repeater system works flawlessly. I have two of these H.O. flashers in a 60" tall x 36" wide cabinet (one top-center pointing down and one at the bottom-center pointing up). I never have a single problem with any remote or any device on any shelf in there working off the reflection on the back of the doors. Granted the cabinet is white, but it is flawless and lightening fast. Can't say enough good things about these flashers.

    Posted on 4/21/2013

    Review of 6756ho Review by CATAZ
    Review of 6756ho

    Worked for about 3 days and quit.

    Posted on 11/15/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

Please wait...