Niles Audio HDLCR High Definition Left, Center, Right Channel In-Wall / In-Ceiling Speaker (Each)

Niles Audio HDLCR High Definition Left, Center, Right Channel In-Wall / In-Ceiling Speaker (Each)

Get the Most out of your Surround Sound Stereo with this Premium Front (Left, Center or Right) Channel Speaker
  • Dual 5-1/4-inch woofer and 1-inch pivoting dome tweeter
  • Each speaker handles up to 150 Watts
  • Bass/Treble controls and a CTR L/R Mode switch allow for sound adjustments after installation
  • Hassle free new construction or retrofit installation



List Price: $399.95

Your Savings: $251.43

REWARDS: 148 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The Niles Audio HDLCR High Definition Side / Rear Channel In-Wall / In-Ceiling Speaker is designed for use as a high definition, front left, center and right channel in multi-channel music or 5.1 / 7.1 channel home theater systems. They employ several unique components that have been specifically engineered to deliver the most subtle sounds in music or the booming action sound in a movie. This includes the Niles Directed Sound Field Geometry (DSFG). With DSFG, the tweeter is offset which results in the flattest frequency and phase response, offering the optimum performance to a seated listener, even if the speaker is mounted above a built-in TV. With Niles Audio high definition voice matching, these speakers sill be perfectly compatible with other Niles Audio HD in-wall, on-wall, and ceiling-mount models. The ideal setup would include the Niles Audio HDFX speakers, which are used as the side / rear channel speakers. They are the best choice for any home theater where the quality of sound is the most important consideration as they exceed specifications set forth by Dolby Laboratories for the accurate reproduction of Dolby Digital-Encoded Sources. One speaker is included; you will need to purchase three speakers to build out a front left, center and right channel installation.

    About the Woofer
    The Niles Audio HD speakers have a woofer that features an injection-molded TCC (Talc, Carbon, and Ceramic-filled) polypropylene cone that is extremely stiff and lightweight, which helps reduce breakup and lowers distortion while delivering an accurate, dynamic response. A butyl rubber cone surround dampens midrange resonance and provides exceptional durability. A vented pole piece adds powerful bass response. A bumpback woofer magnet allows a high level of bass performance to be achieved.

    About the Tweeter
    The Niles Audio HD speakers have a Teteron tweeter with a a tri-laminate design that eliminates unwanted resonances and prevents breakup modes, leaving an ultra-clear, sweet, natural sound which still maintains ultra-wide dispersion for clear and detailed high-frequencies. The tweeter is features precision adjustment control which moves in 1mm increments, then pivots for precise aiming of high frequencies. This can be done post-installation so you can direct sound in the ideal listening area.

    Additional Features
    There are two controls mounted on the front of the speaker that help fine tune your listening experience. 1) a Bass and Treble controls enable precise tone matching in any room, and 2) a CTR L/R mode switch to optimize performance in applications
    as either a center channel or left/right loudspeaker for front-channel use. The speaker even has a a knock-out for an infrared (IR) sensor (Niles Audio MS110 - sold separately) installs discreetly behind the aluminum grille, when you want to control your equipment, you simply point your remote control at the speaker.

    Please Note: High Definition (HD) Series speakers from Niles are designed for an in-wall (wall mount) installation as their primary application, but can be used for an in-ceiling (ceiling mount) application as well.

    Installation options include the following corresponding products:

    For additional information regarding installation considerations and speaker placement, please refer to the owner's manual. It describes in detail the following topics:
    • Recommended amplifier power
    • Speaker wire
    • Incorporating a remote control
    • Insulating the wall cavity
    • Placement for critical listening
    • The boundary effect
    • Placement for varying listening positions
    • Placement for home theater front applications
    • Running speaker wire in new construction
    • Concealing speaker wire in existing walls
    • Installation of brackets, frame and grilles in new construction and existing walls
    • Installation of the speaker, sensor and grille in new construction or existing walls

  • Specifications
    Manufacturer Niles Audio
    Manufacturer Product No. HDLCD, FG01151
    UPC 760514011519
    Construction 5-1/4" injection-molded TCC (talc, carbon, and ceramic-filled) polypropylene woofer, 1" fluid-cooled Teteron dome tweeter
    Recommended Amplifier Power 10W To 150W per Channel
    Nominal Impedance 4Ohms
    Frequency Response 65Hz - 21kHz +/-3dB
    Sensitivity 89dB for 2.83 volts of Pink Noise, measured at 1 meter on axis
    Overall Exterior Frame Dimensions 8-1/4" X 14-1/2"
    Depth Behind Wall 3-1/2" (assumes 1/2" Drywall)
    Wall Cut-Out Dimensions 7-1/8" X 13-1/4"
    Wiring Requirements We recommend 16 to 18 gauge stranded wire for up to 80 feet, 14 gauge stranded wire for up to two hundred feet. Connectors accommodate 12 to 18 gauge stranded wire
    Warranty Manufacturer Lifetime Limited

  • 1 Review

    Review of 67247 Review by JOE
    Review of 67247

    happy with the product and shipped across to australia without a problem.

    Posted on 10/11/2011

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Niles Audio HD speaker
    • 1x - Grille
    • 1x - Frames
    • 1x - Cutout Templates
    • 1x - Owner's manual

Please wait...