Niles Audio FG01613 Door Bell Interface DBI-2

Niles Audio FG01613 Door Bell Interface DBI-2

DBI-2 Doorbell Interface for Niles MultiZone Control Systems
  • Four selectable chimes
  • Two user recorded options
  • Triggered by Contact Closure or Voltage
  • Both inputs support lighted doorbell buttons
  • Separate level adjustments for chime & page pass through
  • Manufacturer warranty


REWARDS: 349 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The DBI-2 doorbell interface by Niles Audio is a wonderful addition to the Niles Audio multizone controls systems as well as multizone control systems from other leading manufacturers. Once externally triggered from either the front or back door, one of the four pre-recorded or two custom recordable chimes will be heard through your Niles Audio MultiZone or similar control system. Double bank DIP switches provide you a selection of all possible chimes. The cust recordable chimes are plated at the same volume as the pre-recorded. These custom chimes can be any analog signals connected to the audio input using an RCA audio cable. Stereo RCA audio cables can be converted to mono using an RCA "Y" Adapter. You have triggers for two individual chimes to offer you an easy way to distinguish between the front and backdoor. No need to worry wheather your doorbell button is lighted or not this system is compatibe with both types providing the voltage for the button if needed.

    Locating a suitable area to mount the DB-1 should be no trouble at all. Included with the unit are four adhesive rubber feet, these are to be used for locating the unit on a shelf top. Mounting the DB1-2 to the back of a cabinet or wall is possible using screws (not included). If a mounting location is easier than a shelf top, just be sure to disconnect all cables (12VDC power adapter) before actually mounting the unit.

    Contact Closure and Voltage are the two trigger options for the DBI-2. Both trigger options provide trigger inputs for two independent chimes. The contact closure input can be used with standard push buttons, lighted or not. The voltage trigger can be activated by 3V-30V, they are not dependent on polarity and will opertate with either AC or DC voltages.

    Features and Benefits
    • Adds security and convenience to multizone controller systems with paging inputs
    • Plays standard doorbell chimes such as "Westminister"
    • Two customized sound options to add your own personal touch to your door chime.
    • Independent audio level adjustments so sound and chime can be set to the same decibel level

  • Specifications
    Manufacturer Niles Audio
    Manufacturer Product No. FG01613
    UPC 760514016132
    Audio Chime 100 Hz ~ 3 kHz, +/- 3 dB
    Audio Pass Through 20 Hz ~ 20 kHz, +/- 0.5 dB
    Power Supply Input 100-240V AC 50-60 Hz 0.5 A
    Power Supply Output 12V DC 1.25 A
    Voltage Trigger Input 3V-30V AC/DC
    Contact Closure Inputs < 10 ohms
    Unit Dimensions 7-7/8" W x 4-1/8" H x 1" D, 20 cm W x 10.5 cm H x 2.5 cm D

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - DBI-2 Doorbell Interface
    • 1x - Set of Rubber Feet
    • 1x - Universal Power Supply
    • 1x - Installation Guide

Please wait...