MuxLab Inc HDMI Over IP Extender Kit With Power Over Ethernet (PoE)

MuxLab Inc HDMI Over IP Extender Kit With Power Over Ethernet (PoE)

Extended Wireless High-Definition Video And Audio With No Dedicated HD Cabling System
  • High-definition 1080p quality via LAN
  • Supports up to 16 transmitters and 200 receivers
  • Uses existing LAN cabling infrastructure
  • Accessible via any existing LAN connection
  • Great for meetings, trainings, surveillance, video conferencing, and broadcasting



List Price: $700.00

Your Savings: $160.26

REWARDS: 539 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The MuxLab Inc. HDMI Over IP Extender Kit with PoE 500752 distributes digital content from an HDMI source to practically any number of remote displays in 1080p high-definition (HD) quality on a preexisting LAN over an IP network. The extender kit will make your HD AV broadcasts smooth full motion videos with images and text sharp enough to give you maximum visual effect and easy viewing. The extender supports up to 16 transmitters and 200 receivers that are broadcast in point-to-point and point-to-multipoint formats. Because the extender uses the existing LAN line to broadcast audio and visual data, displays can be distributed up to 330 feet away from the source devices while sustaining consistent 1080p HD video and audio quality. The HDMI Over IP Extender Kit with PoE is the perfect solution for audio and video signal extension via the existing LAN in your home, and is designed with Gigabit LAN interface to support super high speed transmission, which makes it ideal for live presentations, public broadcasting, education training, boardrooms, video conferencing streaming and more.

  • Specifications
    Manufacturer MuxLab Inc
    Manufacturer Product No. 500752
    UPC 627699007525
    Dimensions 3.70 inches x 3.68 inches x 0.97 inches

    (94 millimeters x 93.5 millimeters x 24.6 millimeters)
    Weight 2.2 pounds

    1.08 kilograms
    Environment HDMI 1.3a


    Devices DVD







    Servers Supporting HDMI
    Transmission Transparent to the user
    Bandwidth 225 MHz
    Compression Method MJPEG
    Bit Rate 60 Mbps
    Latency One (1) frame. At 30 frames per second (FPS) there is a 33 milisecond latency
    Network Requirements Point to Point: 100 BaseT

    Multipoint: 1000BaseT
    IR Frequency 38 KHz
    Configurations Point-to-Point



    *For multipoint-to-multipoint configuration the gigabit Ethernet switch must support the IGMP communications protocol
    Connectors One (1) HDMI receptacle. Note: HDMI cables not included

    One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair via 10/100BaseT

    One (1) 3.5mm jacks for IR emitter/sensor.

    Four (4) DIP Switches for device ID addressing.
    DIP Switch 4-position DIP to set Device ID
    Maximum Distance

    Based on a maximum length of 6.6 ft (2 m) of HDMI cable per end.
    Cat5e/6: 330 ft (100 m) up to 1080P*

    *Gigabit Ethernet required for 1080p

    Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.
    RJ45 Pin Config

    Reverse Polarity Sensitive. Use EIA/TIA568A or 586B straight through wiring.
    RJ45 Link

    Pin 1 (R)

    Pin 2 (T)

    Pin 3 (R)

    Pin 4 (R)

    Pin 5 (T)

    Pin 6 (T)

    Pin 7 (R)

    Pin 8 (T)
    Cable One (1) Cat 5e/6 or better twisted pair cables required
    Power Supply Two (2) 110-240V/5VDC power supplies with interchangeable blades
    Power Consumption Transmitter: 2.9 Watt

    Receiver: 1.8 Watt
    Temperature Operating: 32°F to 104°F( 0°C to 40°C)

    Storage: -4°F to 185°F ( -20°C to 85°C)

    Humidity: Up to 95% non-cond
    Enclosure Metal
    Compliance Regulatory: FCC, CE, RoHS

    Flammability: 94V0
    Manufacturer Warranty 2-year warranty
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - HDMI over IP Encoder
    • 1x - HDMI over IP Decoder

Please wait...