MuxLab 500110 CCTV IP Extender Kit

MuxLab 500110 CCTV IP Extender Kit

Extend Distance Between IP Camera and 10/100BaseT LAN
  • Supports up to two (2) IP cameras via coax or Cat5e/6 (1 twisted pair)
  • Up to 650 feet (200m) @ 100Mbps
  • Up to 1 mile (1.6 km) @ 25Mbps
  • Plug-and-forget - eliminates service calls
  • Leverages existing coax or Cat5e/6 installations



List Price: $800.00

Your Savings: $213.33

REWARDS: 586 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • The CCTV IP Extender Kit (500110) allows any CCTV IP camera to be connected over extended distance via Cat 5e cable or Coax cable. The 500110 supports up to two IP cameras up to 650 feet (200m) at 100 Mbps and up to 1 mile (1.6km) at 25Mbps.

    Typical Applications

  • Specifications
    Manufacturer MuxLab
    Manufacturer Product No. 500110
    UPC 62769900110
    Environment CCTV IP cameras, NVR, IP encoders, network switches and any device with a 10/100Mb/s Ethernet port, supporting IP
    Devices Transparent to the user
    Transmission Ethernet: IEEE 802.3 10BaseT, IEEE 802.3U 100Base-TX, IP ver 4 and 6. Line side: VDSL-DMT: ITU-T G993.1 VDSL, ITU-T G997.1, G.993.2 VDSL2
    (profile 17a).
    Maximum Distance versus Speed (Asymetric-Downstream/Upstream)
    • Cat5e/6
      5000ft (1.5km) => 17Mb/s 1.2Mb/s
      4000ft (1.2km) => 22Mb/s 5.3Mb/s
      3000ft (.9km) => 28Mb/s 10Mb/s
      2000ft (.6km) => 34Mb/s 21Mb/s
      1000ft (.3km) => 44Mb/s 31Mb/s
    • RG59/U 20AWG Coax
      5000ft (1.5km) => 31Mb/s 14Mb/s
      4000ft (1.2km) => 39Mb/s 21Mb/s
      3000ft (.9km) => 39Mb/s 26Mb/s
      2000ft (.6km) => 44Mb/s 28Mb/s
      1000ft (.3km) => 44Mb/s 31Mb/s
    • Note: With two (2) cameras connected, maximum distance depends on
      throughput/resolution/compression ratio of the camera; 5 to 25Mbps per camera
    Cable Between Unit Coax 75 ohm or Cat5e/6 twisted-pair, AWG24 or better
    Cable Between Ethernet Port
    • 10Mb/s: CAT3, 4 or 5 UTP up to 100m (330ft)
    • 100Mb/s: CAT5, 5E or 6 UTP up to 100m (330ft)
    LED Indicators Power, Link, Ethernet: 10/100 Mbps, Ethernet: Activity
    • One isolated BNC 75 ohm female to connect remote unit
    • One isolated RJ45 to connect remote unit
    • One or two metallic RJ45 with leds for Ethernet with auto reversal
    • One power connector, 2mm
    Pin Configuration (polarity insensitive)
    • RJ45 connector: Pin 4 & Pin 5 (1 pair required only, blue and white/blue)
    • BNC: 75 ohms coax cable: Center & Shield (shield is isolated from chassis)
    Cables for Ethernet port One or two Cat 5e/6 twisted pair cables required (straight or crossover)
    Power Supplies (Included) 100-240V/5VDC/625mA. Two power supplies with for NA, Eur and UK
    Power Consumption 1.2 Watts each unit
    • Operating: 0° C to 60° C
    • Storage: -55° C to 85° C
    • Humidity: Up to 95% non-cond.
    Enclosure Plastic
    Dimensions 4.50" x 3.0" x 1.25" (11.4cm x 7.6cm x 3.2cm)
    Weight 1 lb. (0.5 kg)
    • Regulatory: FCC, CE, RoHS
    • Flammability: 94V0
    Manufacturer Warranty 2 Years

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Transmitter
    • 1x - Receiver
    • 2x - Power Supply

Please wait...