- Details
- Specs
- Reviews
- What's Included
-
If you are considering putting your cable/satellite receiver, DVD/Blu-ray player or gaming system in another room away from your HDTV, the 1-Port HDMI Over Cat5 / Cat6 Wall Plate Extender Balun Kit is the perfect solution. The wall plate extenders mount to your wall; simply attach your source AV component to the sender extender and the destination HDTV, projector or monitor to the receiver extender. Additionally these extenders feature an IR Receiver at the Receiver Extender and an IR Emitter at the Sender Extender, so you can also control your source AV component with your existing remote control. Between the extenders, you can run up to 30 meters of Cat5e /Cat 6 cable through your walls, ceiling, attic, etc. to couple the two HDMI connections. Whether temporarily moving your television into another room or due to limitations with your home's setup, this device helps overcome the signal loss inherent to lengthy HDMI cable setups.
Manufacturer Recommendations:
(1) - Use a minimum of 24 AWG HDMI cables between the source and destination when connecting this extender, to ensure minimal signal loss and maximum High Speed signal reliability.
(2) - Although this extender will work with Cat5e UTP cables, it is strongly recommended to use Cat6 STP cabling for anything longer than minimal distances. Cat6 STP cabling will provide the highest reliability and signal integrity to ensure that your installation is trouble-free under all conditions for years to come.
-
Specifications Manufacturer Monoprice Manufacturer Product No. 8009 UPC 844660080091 Data Transfer Speed 6.75Gbps - 10.2Gbps Supported Resolutions 1080p/1080i/720p/576p/576i/480p/480i Color Support 24 and 36 bit Deep Color Maximum Output Cable Distance Less than 5 meters Maximum Input Cable Distance Less than 5 meters Maximum Distance Between Extenders Up to 30 Meters5 Operating Humidity Range 5 to 90% RH (no condensation) Operating Temperature Range -15° to 55° C (5° to 131° F) Dimensions 114mm x 70mm x 41mm (4.5" x 2.7" x 1.6") IR Signal Supports single-band IR signals between 39-45 kHz IR Cables 4'10" long Data Transfer Speed 6.75Gbps - 10.2Gbps Regulatory Certification FCC, CE
-
5 Reviews
- Review of 47004 Review by KEN
-
Review of 47004
KEN
Rating Second one we purchased was dead out of the box. Had to order another one. They do perform as expected. The IR receiver needs to be more flexible. It's not very pretty and you cannot use any other IR emitters with this system.
Posted on 9/25/2013
- Review of 47004 Review by Matt
-
Review of 47004
Matt
Rating Just installed with 50' of Cat6 cables between the wallplates yes - requires two Cat6 cables. Works great, including the IR system.
Posted on 9/14/2013
- Review of 47004 Review by JAMES
-
Review of 47004
JAMES
Rating I have had no trouble using these wall plates. I have run 1080p as far as 50ft over Cat5e and the IR extender has worked perfectly as well. I would recommend this product to others.
Posted on 12/13/2012
- Review of 47004 Review by JASON
-
Review of 47004
JASON
Rating Product passes video and audio signals without any issues. The IR will only work if there is an active video signal since it is not a powered unit. So if you turn off your video source you will not be able turn it back on via the IR.
Posted on 7/8/2012
- Review of 47004 Review by JERRY
-
Review of 47004
JERRY
Rating HDMI Works great.... IR system doesn't work very well at all. I have tried numerous different configurations and setups and I still had no luck with getting the IR system to work.
Posted on 4/26/2012
Leave a Review
-
- 1x - Sender Extender
- 1x - Receiver Extender
- 1x - IR Receiver
- 1x - IR Transmitter (Emitter)
- 1x - Owner's Manual
- 1x - Sender Extender