Lutron LRF2-OCR2B-P-WH Radio Power Saver Wireless RF Celing Occupancy/Vacancy Sensor, White

Save Energy by Automating Lights to be On Only when an Area is Occupied
  • Passive infrared motion detection offers precise motion detection
  • Three settings: Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and Manual-On/Auto-Off
  • Multiple ceiling-mount methods available for different ceiling materials
  • Battery powered - no wiring required



List Price: $85.00

Your Savings: $17.70

  • Details
  • Specs
  • Reviews
  • What's Included
  • The Lutron Radio Powr Savr Wireless RF Ceiling Occupancy/Vacancy Sensors are battery-powered passive infrared (PIR) detectors that can automatically control lights or fans in a Lutron Maestro Wireless system. The Radio Powr Savr Occupancy/Vacancy Sensor detects the heat from people moving within an area to determine when the space is occupied. The sensor then wirelessly transmits the appropriate commands to an associated Maestro Wireless device (or devices) to turn on or off automatically. Up to 3 sensors can be added with each RF dimming or switching device for extended coverage. Each sensor may be added to up to 10 compatible RF dimming and switching devices for spaces with multiple zones of lighting. Lutron sensors combine both convenience and exceptional energy savings along with ease of installation.

    Please Note: This product also works with Lutron RadioRA2 and GRAFIIK Eye QS Wireless systems.

    Additional Key Features
    • Auto-On Low-Light feature will only turn lights on automatically if there is less than approximately 1 fc (10 lux) of ambient light
    • 360° coverage ranges from 324 sq. ft to 676 sq. ft. for superior fine motion detection
    • Simple and intuitive adjustments available for Timeout, Auto-On, and Sensitivity settings
    • Front accessible test buttons make setup easy
    • Lens illuminates during test mode to verify ideal locations
    • Meets CA Title 24 requirements
    • RoHS compliant
    • 10-year battery life design

    • Sensor Placement
    • The sensor's ability to detect motion requires line-of-sight of room occupants. The sensor must have an unobstructed view of the room. DO NOT mount behind or near tall cabinets, shelves, hanging fixtures, ceiling fans, etc. The sensor cannot see through glass objects such as patio or shower doors.
    • Hot objects and moving air currents can affect the sensor's performance. To ensure proper operation, the sensor should be mounted at least 4 ft (1.2 m) away from light bulbs below the ceiling line and HVAC vents.
    • The sensor's performance depends on a temperature differential between the ambient room temperature and that of room occupants. Warmer rooms may reduce the sensor's ability to detect occupants.
    • The sensor should be mounted within 60 ft (18 m) line of sight or 30 ft (9.1 m) through walls, of the associated dimming and switching receiving devices.

    • Drop Ceiling (Compressed Fiber Ceiling Tile) Mounting
      The ceiling tile mounting wire is provided for both temporary and permanent mounting of the sensor to ceiling tiles. It is designed to allow temporary mounting, testing, and repositioning (if necessary) of the sensor without damaging a ceiling tile. Once the sensor's final position has been chosen, the mounting wire should be twisted to lock the sensor in place permanently.

      Solid Ceiling (Drywall, Plaster, Concrete, or Wood) Mounting
      Temporary mounting: Two 3MTM Command adhesive strips are provided for temporarily mounting and testing the sensor. These strips are designed for easy, damage-free removal and are not reusable.
      Permanent mounting: Screws and anchors provided to mount sensor.

      Please Note: Temporary mounting is recommended to test sensor coverage and wireless communication before permanently installing the sensor.

      Clear Connect RF Technology
      Clear Connect is a proprietary wireless protocol, so interference from other devices is nearly impossible. And because each control is uniquely addressed, the risk of interference from other sensors is eliminated. With Clear Connect, the sensors communicate flawlessly, every time.

  • Specifications
    Manufacturer Lutron
    Manufacturer Product No. LRF2-OCR2B-P-WH
    UPC 027557831970

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - LRF2-OCR2B-P-WH Radio Powr Savr Wireless RF Celing Occupancy/Vacancy Sensor, White
    • 1x - Installation Guide

Please wait...