UPB Plug-In Lamp Module

Leviton Security & Automation HL591-W UPB Plug-In Lamp Dimmer Module

Add Remote Dimming to a Plug-In Lamp using UPB Technology
  • Store up to 16 preset lighting levels
  • Controls lamps up to 300W
  • Plugs into standard household AC outlet
  • Single pass-thru outlet
  • Remotely controllable with UPB controllers
  • Uses UPB, Universal Powerline Bus technology
  • Formerly an HAI product



List Price: $113.40

Your Savings: $27.40

REWARDS: 86 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • The Leviton Security & Automation UPB Plug-in Lamp Dimmer Module utilizes Universal Powerline Bus technology to allow for remote On, Off and Dimming of an individual lamp. The Dimmer Module plugs into a standard 120V household AC outlet and the UPB technology uses your homes’ existing electrical lines to communicate which allows for a reliable and strong signal. At the bottom of the UPB Dimmer Module is a pass-thru outlet to allow for plug-in of a single lamp, up to 300-watts, to be controlled remotely with any UPB compatible controller. Once setup, the Plug-In Module can store as many as 16 different preset lighting levels and fade rates to provide a multitude of lighting scenes that can be activated at the push of a button. On the front of the Lamp Module is an LED indicator light which will light up “blue” when the load is turned off. Additionally this UPB Module can be used to simply to turn a light On/Off by putting it into non-dimming mode which will in-turn allow it to work with loads such as fluorescent lighting.

    The Leviton Security & Automation UPB Plug-In Lamp Dimmer Module uses Universal Powerline Bus technology for superior performance and reliability. Similar to the standard X10 protocol, Universal Powerline Bus technology uses your existing power wires, so no rewiring is necessary in order to use this switch. But UPB benefits include its higher reliability, since its signal strength is stronger than X10, with increased electrical noise resistance. UPB products are NOT X10 compatible.

    In 2012, HAI was acquired by Leviton, with the transitional name, “HAI by Leviton” applied. Mid 2013, “Leviton Security & Automation” was formalized.

    The previous HAI part number for this product was 59A00-1.
  • Specifications
    Manufacturer Product No.HL591-W (Formerly HAI Part # 59A00-1)
    Dimensions3in x 2in x 1.3in
    Weight0.25 lbs
    Lighting ScenesStore up to 16 preset light levels
    ControllerUPB compatible controllers
    Pass-Thru Outlets1
    Power Source120V AC outlet
    Indicator LightYes
    Incandescent Loads DimmingYes
    Inductive Loads DimmingNo
    Fluorescent Loads Non-DimmingYes (configurable)
    Power MaxLamps up to 300-watts
    Current Max Non-Dimming2.5A
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x – UPB Plug-in Lamp Dimmer Module
    • 1x – Instructions

Please wait...