Leviton PR150-1LW Wall Mounted Occupancy Sensor, White

Occupancy Sensors Deliver Hands-Free Switching and Energy Savings



List Price: $30.99

Your Savings: $11.30

  • Details
  • Specs
  • Reviews
  • How It Works
    How It Works: People naturally emit a small amount of infrared heat. As a person passes through the field of view, the sensor detects the motion as a change in the infrared background and responds by switching ON area lights. After the field of view is unoccupied for a user defined time, the sensor will automatically turn OFF the lights.

    Automatic ON/OFF Operation
    The units turn lights ON automatically when motionis detected. When motion is no longer detected, lightsremain ON for a selected time (from 15 sec. to 15 min.) then automatically switch off.

    Passive Infrared (PIR)
    Infrared occupancy sensors are passive devices designed to detect the movement of heat-emitting bodies. They are installed to monitor areas where there are no physical obstructions to block the sensor
  • Intended for use with rapid start fluorescent or incandescent lighting only.
  • Installing this device requires experience with residential and commercial wiring practices. Consult local building codes before attempting to install this device.
  • Reviews 1 - 10 of 26

    1. 1
    2. 2
    3. 3
    Review of 2522W Review by Isabelle
    Review of 2522W

    DO NOT BUY THIS MODEL. Total garbage. Very poorly manufactured. I bough and installed several of them and in a few days returned them all. I've been using sensor switches for more than 20 years. This is absolutely the worst.

    Posted on 3/24/2013

    Review of 2522W Review by JOERG
    Review of 2522W

    Good detection range. Fast and quiet switching operation (incandescent lights only).

    Posted on 3/3/2012

    Review of 2522W Review by JimmieJoe
    Review of 2522W

    This product work fine with magnetic florescent lights which are the old generation fluorescents. The people who are saying it does not work with florescent light are not using magnetic florescent lights. The product states magnetic florescent lights only on the package.

    People who are having issue with flickering, strobing and not turning off or glowing are trying to use the product with electronic florescent lights which are the new generation fluorescents, which includes compact fluorescents.

    I have had no issues with magnetic florescent light and this device. I did had all of the problems mentioned with electronic florescent, however, I found that as long as you have 1 incandescent in the circuit it will operate electronic florescents without issue. Such as an overhead light with 3 incandescent bulb you can replace 2 of the 3 bulbs with new CFLs and everything works fine and you just can not change all 3 bulbs to CFLs.

    Posted on 11/30/2011

    Review of 2522W Review by Pete
    Review of 2522W

    Does not work with fluorescent lights!!!

    Posted on 9/23/2011

    Review of 2522W Review by digiluke
    Review of 2522W

    Works like a champ - Those complaining about using it with FANS and CFLs clearly didn't read the spec sheet before buying. There is a difference in calculating load based on Wattage and Startup current in a Fan motor. Also CFLs CAN work but only if they are of the extremely expensive Instant start variety, LED's may not work due to their small current draw.

    Posted on 7/10/2011

    Review of 2522W Review by MATTHEW
    Review of 2522W

    They work as advertised. Easy to install. Time adjustment is concealed by the faceplate, so time adjustment must be set during install unless you want to keep taking the face plate off.

    Posted on 6/12/2011

    Review of 2522W Review by RIZWAN
    Review of 2522W

    Solid performer. Decent range on the sensor as well - maybe 6-8 feet.

    Posted on 1/18/2011

    Review of 2522W Review by Jerry H
    Review of 2522W

    This was connected to a small bathroom exhause fan 60CFM and did not work. Would not run the fan a full speed even after changing the power setting.

    Posted on 10/8/2010

    Review of 2522W Review by RICHARD
    Review of 2522W

    Item works well but doesn't work with compact fluorescent bulbs. This is not made clear either on the manufacturer's packaging or the information on your web site. I had to call leviton to confirm this. Then they told me the model that works with the cf bulbs. You sell that model but it cost about 3 times the one I bought.

    Posted on 8/25/2010

    Review of 2522W Review by
    Review of 2522W

    Easy to Wire in and can set any time delay required. No markings on the timer though so it's trial and error to figure out the delay you want.

    Posted on 7/5/2010

    Leave a Review

    Only registered users can write reviews. Please, log in or register

Please wait...