Interlogix TX-6010-01-1 Supervised Wireless Smoke Alarm

Interlogix TX-6010-01-1 Supervised Wireless Smoke Alarm

Reliable, Self-Diagnostic Smoke Alarm for Safety and Peace of Mind
  • Self-diagnostics reduces the chance of a nuisance alarm
  • Replaceable optical chamber make cleaning a snap
  • Two 3V Lithium batteries provide long battery life (included)
  • Learn Mode feature reduces installation time with quick programming
  • Low battery pre-alert sent to central station before sounder chirps



List Price: $144.02

Your Savings: $56.03

REWARDS: 87 points
  • Details
  • Specs
  • Reviews
  • The TX-6010-01-1 supervised photoelectric smoke alarm is a self-diagnostic, Learn Mode wireless sensor. It features a 319.5MHz crystal transmitter, built-in sounder, low battery annunciation, diagnostic/status LED, and integrated fixed temperature and rate-of-rise heat sensors. The unit communicates an alarm and trouble condition to a GE compatible control panel.

    The TX-6010-01-1 continually monitors operational status and provides a visual trouble condition if it drifts out of the sensitivity range or fails internal diagnostics. In addition, the mounting tamper sensor will send a trouble alert as necessary. It meets NFPA 72 field sensitivity testing requirements without the need for external meters. The alarm sensitivity level can be determined at the unit. Another feature is built-in drift compensation that allows the alarm to adjust sensitivity automatically as it becomes dirty over time. The drift compensation feature dramatically increases the time between cleaning, as well as reducing the chance of a nuisance alarm.

    A low battery pre-alarm feature sends a signal to the alarm company control station long before the smoke alarm begins its low battery chirp. This ensures a pro-active response to replace the battery in a timely manner and without the disturbance caused by an alarm beeping continuously when it nears the end of its life.

    • Long life 3V lithium battery operated
    • Learn Mode for easy programming
    • Reliable 319.5MHz crystal transmitter
    • Low battery pre-alarm sent to control station
    • Field replaceable optical chamber
    • Automatic drift compensation
    • Integral heat detection
    • Built-in 85dB temporal sounder
    • Hush feature
    • Low battery pre-alarm sent to control station

  • Electrical
    • Voltage: 3 VDC
    • Average standby current: 35 uA, typical
    • Test current: 2 mA, typical
    • Alarm current: 70 mA, typical
    • Battery type: 3V lithium CR123A
    • Low battery threshold: 2.7 V causes low battery signal
    • Sounder: 85dB at 10 ft., temporal pattern
    • Low battery beep rate: 1 every 45 2° seconds
    • Sensitivity: 2.3% +/- 0.890%
    • Operating temperature: 40 to 100° F (4 to 38° C)
    • Operating humidity range: 0 to 95% noncondensing
    • RF immunity: 20V/minute minimum; 1 to 1000 MHz
    • Drift compensation adjustment: 0.5%/ft. maximum
    • Rate of rise: 15° F/minute > 105° F (8.3° C/minute > 40.6° C)
    • Fixed: 135°F +/- 5°F (57.2°C +/- 2.8°C)
    • RF frequency: 319.5 MHz
    • Transmitter ID: Preprogrammed, 1 million codes
    • Modulation type: AM
    • Signal format: Pulse-width modulation
    • Output types: Alarm, restore, tamper, low battery, trouble, 1 hour Supervisory
    • Color: White
    • Alarm dimensions: 5.6 x 2.4 in. (142 x 61 mm)
    • Base dimensions: 5.4 x 0.46 in. (137 x 12 mm)
    Regulatory Listings
    • FCC, CSFM
  • 2 Reviews

    x Review by firefighter

    Rate of rise detectors should not be placed near garage entry doors, bathrooms, above stoves, dryers, as they will repeatedly send false alarms.

    Posted on 4/30/2016

    Review of 79515 Review by EDWARD
    Review of 79515

    Easy to install and good value.

    Posted on 5/4/2014

    Leave a Review

    Only registered users can write reviews. Please, log in or register

Please wait...