Insteon Thermostat

Insteon Remote Control Wall Thermostat

Control Your Thermostat From Any Insteon-Compatible Controller
  • Remote control from your smartphone or tablet – combined with the Insteon Hub you’ll be able to adjust the temperature from across the room or across the world
  • Save energy and money by automating the temperature with Insteon sensors – only turn on the A/C when motion is detected
  • Can be Insteon controller: thermostat can activate other Insteon devices when the temperature reaches specific levels
  • Works with heat/cool systems, including advanced 2-stage systems
  • Works with both Amazon Alexa and the Google Assistant for voice control (Insteon Hub required, Alexa device and Google Assistant device each sold separately)

Multi-Pack Options:


REWARDS: 69 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Remote Control

    Control your thermostat from anywhere - in your home from an Insteon Keypad or on the road from your Smartphone with the Insteon Hub.

    System Support

    Our range of thermostat offerings ensures that even the most custom HVAC installation can be controlled.


    Insteon Thermostats fully integrate with your Insteon automation system. Automatically control duct dampers, ceiling fans and more.

    Smartphone Remote.

    Because carrying the thermostat around is just silly.

    When you install an Insteon Thermostat in your home and link it to the Insteon Hub, every smartphone and tablet you own becomes a remote control. It doesn't matter if you're hiding under the covers on a cold winter morning or running late out of the office on a sweltering summer evening, you can adjust the temperature from anywhere and ensure that your home is comfortable all the time.

    Winter Weather Watch

    Keep the blizzard outside and ensure your home is toasty warm by turning up the heat remotely.

    Summer Sun

    Cool down the house when you're on your way home on a blistering summer afternoon.

    Bon Voyage

    Turn off the AC even after you've left. Especially helpful for impromptu expeditions.

    Supported Systems

    A wide range of heating and cooling devices.

    Insteon Thermostat works with most heating and cooling systems found in homes and many businesses. With the exception of heat pumps and sophisticated triple-stage systems, your home's heating and cooling system is most likely compatible with Insteon Thermostat.

    Insteon Features

    When is a thermostat more than just a thermostat? When it's an Insteon Thermostat.

    Duct Dampers

    Add duct dampers to control the flow of conditioned air on a room-by-room basis with IO Module



    Use sensors on doors and windows to prevent the AC from cooling the entire neighborhood when a door or window is left open


    Line Voltage & Millivolt

    Integrated with line voltage systems using Micro Modules and vintage millivolt heaters with IO Module


    Ceiling Fans

    Automatically circulate conditioned air when you run the AC or heater by spinning up ceiling fans



  • General
    Manufacturer Insteon
    Product Name Insteon Thermostat
    Manufacturer Product No. 2441TH
    UPC 813922010824
    Warranty 2 Years
    Insteon Features
    Powerline Mesh Repeater No
    Insteon RF Mesh Repeater Yes
    Insteon Controller Yes
    Insteon Responder Yes
    Maximum Links/Scenes 400
    Status LED Red when Heating is active,
    Green when Cooling is active,
    Off when when neither mode is active,
    blinks Red or Green during setup
    LED Brightness LED can be enabled or disabled locally or via software
    Local Control Yes
    Commands Supported as Controller On | Off
    Commands Supported as Responder On | Off
    Software Configurable Yes
    RF Range 50 ft. (depending on your home’s construction)
    Phase Detect Beacon No, RF only device
    Mounting Wall mount
    Wire Connections Common 24V
    Power 24V
    Heat 1
    Heat 2
    Cooling 1
    Cooling 2
    Screw Clamp Connections Yes, 10 position
    Case Color White
    Plastic UV stabilized ABS
    Beeper Yes
    Beep on Button Press Optional (off by default)
    LED 1 dual-color Red/Green
    Dimensions 5.7"x 3.6"x 1.1"(14.5cm x 9.1 cm x 2.8cm)
    Operating Environment Indoors
    Operating Temperature Range 39° to 104°F (4°to 40°C)
    Operating Humidity Range 0-90% relative humidity
    Storage Conditions -4° F to +158° F (-20° C to 70° C)
    Voltage 24VAC (supplied by furnace or air handler)
    Frequency 50Hz/60Hz
    Retains All Settings Without Power Yes, saved in non-volatile EEPROM
    Certifications FCC, IC Canada, EN International
    Standby Power Consumption < 1 watt
    FCC ID SBP2441T
  • Reviews 21 - 30 of 128

    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 13
    Not all option available on app Review by Salar
    Not all option available on app

    Good piece of equipment but needs some improvements.
    - It's hard to read the LCD from angle compare to the old digital ones.
    - All options are not available in app and most of the settings need to be done on Thermostat - Like day Modes, Time and Day setting (Which is a default features in all WiFi thermostats)

    Posted on 3/23/2016

    Beware This Thermostat In Some Situations Review by Kevin
    Beware This Thermostat In Some Situations

    This thermostat is apparently susceptible to voltage regulations issues, e.g., if the furnace control board provides more or less than the specified 24 volts AC, this unit will not work reliably. The unit completely froze (would not accept any button inputs, even factory reset) with the heat off and there was no way to turn on the heat without replacing the thermostat. it also has the screen go blank when the heat comes on, to return the display and the backlight a few minutes later. My original Honeywell programmable thermostats had no such issues.

    Posted on 2/10/2016

    Works but not quite as resposive as I'd like. Review by XrXca
    Works but not quite as resposive as I'd like.

    When I installed it it kept losing power, turns out that was some bad solder connections on the furnace fan control board, after replacing that everything is working fine.
    It seems to have a wider range for cut in/out than the old one, so I see peaks and valleys on a temperature graph that weren't there before, although I do wonder if going back to Fahrenheit from Celsius would help a bit.
    I do have to say that the "Need 5 Wires" mantra is only applicable IF you are using both Heating and Cooling, with just one or the other (usually Heating) you can just drop the other connection from the equation, and four wires is all you need.
    And I'd second the complaint about needing to press a button to turn on the back light, and that changing the settings rather than ignoring the first button press.

    Posted on 1/6/2016

    Mandatory accessory warning! Review by macsrwe
    Mandatory accessory warning!

    Before you buy this thermostat, check the wiring to your current thermostat. If it has four wires (most older homes do), you WILL need to add the Venstar Add-a-Wire unit to your order, or you will not be able to install it. Once you have all the needed equipment on hand, installation goes smoothly.

    Posted on 12/22/2015

    Works well with Universal Devices ISY994 Review by John
    Works well with Universal Devices ISY994

    The information indicates this works with the Insteon Hub, but I use the Universal Devices ISy994. This thermostat is supported by ISY and works very well!

    Posted on 11/17/2015

    Half the price of a Nest Review by serg
    Half the price of a Nest

    This might not have the bells and whistles that the Nest touts but for half the price I get to remotely control my thermostat. I've heard that most Nest users end up not liking Nest's inability to learn. I should clarify that while the Insteon thermostat is $149 (vs Nest at $249), you do need an Insteon hub ($39 at the time I write this). That's still less than the Nest AND I can add Insteon wall switches and outlets to remotely control other lights and appliances around the house.

    Posted on 4/7/2015

    Wonderful device Review by George the architect
    Wonderful device

    I have installed these thermostats in two of my homes and I can monitor and adjust the temperature and monitor the humidity from my I phone anywhere in the world. If you gave a five wire system great. If not use the add a wire adapter to make a four wire system compatible. Also works great as a programmable thermostat for two day plus five day or seven day programmable options.

    Posted on 3/28/2015

    Review 24441Th Review by Mark
    Review 24441Th

    Have installed a number of these units both using 5 wire and 4 wire (using add a wire) and all have worked as advertised. Some units need to be calibrated but most are very close. I use universal devices to control and really appreciate the humidity readout here in Michigan.

    Posted on 3/8/2015

    Works well; but make sure you have 5+ wires to your thermostat Review by Luke
    Works well; but make sure you have 5+ wires to your thermostat

    - Looks nice
    - Temperature and humidity readings are accurate (I cross-checked it with some other sensors)
    - Clear labeling to make install easy

    - Requires 5 wires to your HVAC system (need to run new wire or get an adapter to make it work)
    - Doesn't have a good way to turn on the backlight. It comes on when you press a button on the thermostat (such as the temperature up button) but that means you have to increase the temperature to get the backlight on. I believe newer ones have fixed this by making the set button accessible without opening the cover.

    Posted on 2/25/2015

    Not for two wire heating only systems Review by Frank
    Not for two wire heating only systems

    You have to buy an adapter for use with two wure systems.

    Posted on 2/24/2015

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Insteon Thermostat
    • 1x - Quick Start Guide
    • 2x - Mounting Screws
    • 2x - Anchors

Please wait...