Insteon Thermostat

Insteon Remote Control Wall Thermostat

Control Your Thermostat From Any Insteon-Compatible Controller
  • Remote control from your smartphone or tablet – combined with the Insteon Hub you’ll be able to adjust the temperature from across the room or across the world
  • Save energy and money by automating the temperature with Insteon sensors – only turn on the A/C when motion is detected
  • Can be Insteon controller: thermostat can activate other Insteon devices when the temperature reaches specific levels
  • Works with heat/cool systems, including advanced 2-stage systems
  • Works with both Amazon Alexa and the Google Assistant for voice control (Insteon Hub required, Alexa device and Google Assistant device each sold separately)

Multi-Pack Options:

Item #: 2441TH IN STOCK - SHIPS TODAY

$69.99
REWARDS: 69 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Remote Control

    Control your thermostat from anywhere - in your home from an Insteon Keypad or on the road from your Smartphone with the Insteon Hub.

    System Support

    Our range of thermostat offerings ensures that even the most custom HVAC installation can be controlled.

    Integrated

    Insteon Thermostats fully integrate with your Insteon automation system. Automatically control duct dampers, ceiling fans and more.

    Smartphone Remote.

    Because carrying the thermostat around is just silly.

    When you install an Insteon Thermostat in your home and link it to the Insteon Hub, every smartphone and tablet you own becomes a remote control. It doesn't matter if you're hiding under the covers on a cold winter morning or running late out of the office on a sweltering summer evening, you can adjust the temperature from anywhere and ensure that your home is comfortable all the time.

    Winter Weather Watch

    Keep the blizzard outside and ensure your home is toasty warm by turning up the heat remotely.

    Summer Sun

    Cool down the house when you're on your way home on a blistering summer afternoon.

    Bon Voyage

    Turn off the AC even after you've left. Especially helpful for impromptu expeditions.

    Supported Systems

    A wide range of heating and cooling devices.

    Insteon Thermostat works with most heating and cooling systems found in homes and many businesses. With the exception of heat pumps and sophisticated triple-stage systems, your home's heating and cooling system is most likely compatible with Insteon Thermostat.

    Insteon Features

    When is a thermostat more than just a thermostat? When it's an Insteon Thermostat.

    Duct Dampers

    Add duct dampers to control the flow of conditioned air on a room-by-room basis with IO Module

    learn-more

    Sensors

    Use sensors on doors and windows to prevent the AC from cooling the entire neighborhood when a door or window is left open

    learn-more

    Line Voltage & Millivolt

    Integrated with line voltage systems using Micro Modules and vintage millivolt heaters with IO Module

    learn-more

    Ceiling Fans

    Automatically circulate conditioned air when you run the AC or heater by spinning up ceiling fans

    learn-more

    Dimensions

  • General
    Manufacturer Insteon
    Product Name Insteon Thermostat
    Manufacturer Product No. 2441TH
    UPC 813922010824
    Warranty 2 Years
    Insteon Features
    Powerline Mesh Repeater No
    Insteon RF Mesh Repeater Yes
    Insteon Controller Yes
    Insteon Responder Yes
    Maximum Links/Scenes 400
    Status LED Red when Heating is active,
    Green when Cooling is active,
    Off when when neither mode is active,
    blinks Red or Green during setup
    LED Brightness LED can be enabled or disabled locally or via software
    Local Control Yes
    Commands Supported as Controller On | Off
    Commands Supported as Responder On | Off
    Beep
    Software Configurable Yes
    RF Range 50 ft. (depending on your home’s construction)
    Phase Detect Beacon No, RF only device
    Mechanical
    Mounting Wall mount
    Wire Connections Common 24V
    Power 24V
    Heat 1
    Heat 2
    Fan
    Cooling 1
    Cooling 2
    Screw Clamp Connections Yes, 10 position
    Case Color White
    Plastic UV stabilized ABS
    Beeper Yes
    Beep on Button Press Optional (off by default)
    LED 1 dual-color Red/Green
    Dimensions 5.7"x 3.6"x 1.1"(14.5cm x 9.1 cm x 2.8cm)
    Operating Environment Indoors
    Operating Temperature Range 39° to 104°F (4°to 40°C)
    Operating Humidity Range 0-90% relative humidity
    Storage Conditions -4° F to +158° F (-20° C to 70° C)
    Electrical
    Voltage 24VAC (supplied by furnace or air handler)
    Frequency 50Hz/60Hz
    Retains All Settings Without Power Yes, saved in non-volatile EEPROM
    Certifications FCC, IC Canada, EN International
    Standby Power Consumption < 1 watt
    FCC ID SBP2441T
  • Reviews 121 - 128 of 128

    Page:
    1. 1
    2. ...
    3. 9
    4. 10
    5. 11
    6. 12
    7. 13
    Review of 2441TH Review by Tim C
    Review of 2441TH
    Rating

    My comment in short is the same as Jay-Utah
    What I found is the Triacs are producing enough heat from a load call for cooling that it generates through the board to the thermistor. When running in cooling set point 76

    Posted on 7/16/2012

    Review of 2441TH Review by MICHAEL
    Review of 2441TH
    Rating

    Very easy to install. Whish I could remotely adjust temperature

    Posted on 7/1/2012

    Review of 2441TH Review by Jay
    Review of 2441TH
    Rating

    Recommend against this thermostat:

    Pros:
    - Thermostat screen is very large and easy to read.
    - Unit looks very nice and sleek
    - Insteon features appear to be complete and was looking forward to the ability to add slave devices

    Cons:
    - Not yet supported by one of the major 3rd Pary Insteon Controllers The ISY

    - DEALBREAKER This unit absolutely fails at it's main job of accurately measuring the temperature. I've received 2 units so far the first I reported defective. In both cases while I could adjust the offset to initially report the same temperature as the Fluke IR Thermometer the thermostat hovered within the same 2-3 degree range. This led to uncomfortable scenarios. I would come home from work and the AC had been running all day bringing the house down to 72 on the Fluke even though the thermostat still reported it at 79. If I adjusted the offset down to match then eventually I would run into the opposite problem. The AC wouldn't kick on even if the house temperature got up to 84 because the thermostat still reported ~74.

    In my opinion until the unit functions FIRST as a thermostat the rest of the Pros are not worth discussing. I'll be returning this and going back to the Venstar.


    Smarthome Responds: The temperature issue was corrected in units that shipped after 7/16/12.

    Posted on 6/24/2012

    Review of 2441TH Review by Jay S
    Review of 2441TH
    Rating

    Recommend against this thermostat:

    Pros:
    - Thermostat screen is very large and easy to read.
    - Unit looks very nice and sleek
    - Insteon features appear to be complete and was looking forward to the ability to add slave devices

    Cons:
    - Not yet supported by one of the major 3rd Pary Insteon Controllers The ISY

    - DEALBREAKER This unit absolutely fails at it's main job of accurately measuring the temperature. I've received 2 units so far the first I reported defective. In both cases while I could adjust the offset to initially report the same temperature as the Fluke IR Thermometer the thermostat hovered within the same 2-3 degree range. This led to uncomfortable scenarios. I would come home from work and the AC had been running all day bringing the house down to 72 on the Fluke even though the thermostat still reported it at 79. If I adjusted the offset down to match then eventually I would run into the opposite problem. The AC wouldn't kick on even if the house temperature got up to 84 because the thermostat still reported ~74.

    In my opinion until the unit functions FIRST as a thermostat the rest of the Pros are not worth discussing. I'll be returning this and going back to the Venstar.


    Smarthome Responds: The temperature issue was corrected in units that shipped after 7/16/12.

    Posted on 6/24/2012

    Review of 2441TH Review by Ben
    Review of 2441TH
    Rating

    Works great. Mobilinc updated the android platform last week, and the 2144th now shows up under Thermostats.

    Posted on 6/20/2012

    Review of 2441TH Review by DANIEL
    Review of 2441TH
    Rating

    Great thermostat in conjunction with ISY. Integrated with wide variety of Insteon devices and ISY programming gives great flexibility.

    Posted on 6/20/2012

    Review of 2441TH Review by BEN
    Review of 2441TH
    Rating

    Works as advertised. Was able to calibrate the temperature and humidity readings as needed. Works fine with ISY-99i. Developers for Android platform at Mobilinc are "working on it." It currently shows up in the device list, but that's it.

    Posted on 6/14/2012

    Review of 2441TH Review by Mitch
    Review of 2441TH
    Rating

    WHY in the world would SmartLabs design a product that is NOT compatible with the most prevalent form of HVAC system installed in today's homes - the heat pump? I don't have one yet, but have been considering getting one. I like that the wireless interface can't be removed from the thermostat unlike the current Venstar configuration, as that tends to be a problem in my household in order to bypass the control system. I don't currently have a heat pump since my system is electrically cooled, propane heated, but have been weighing the possibility. Come on SmartLabs.

    Posted on 6/3/2012

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Insteon Thermostat
    • 1x - Quick Start Guide
    • 2x - Mounting Screws
    • 2x - Anchors

Please wait...