Honeywell RWD41/T Water Defense Water Alarm

Honeywell RWD41/T Water Defense Water Alarm

Water Defense Alarm Emits Audible Alert when Cable Detects Water
  • Entire length of cable detects water
  • Emits audible alert when water is detected
  • 4ft cable included
  • Ideal for areas not frequented
  • Expandable up to as much as 250ft



List Price: $29.99

Your Savings: $4.99

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Protect your home from water damage before it happens with Water Defense Water Alarm from Honeywell. The Water Alarm comes with a 4 foot long water sensing cable which is able to detect water along the entire length of the cable. If the cable detects water it will instantly emit an audible alarm to alert those around that there is a leak in the appliance(s) it is setup to monitor. An added feature with the Water Defense Water Alarm is that it is an expandable system. While it comes with a 4 foot long cable it is not limited to this if you want to use it to monitor a larger area. Water sensing cable extensions for this system can be added making it expandable up to 250 feet, expandable cable sold separately. The Water Alarm will also provide peace of mind when setup in areas that are not frequently observed such as water heaters and basement perimeters which could potentially go unnoticed for a time if a small leak were to start. The Water Defense Water Alarm base unit is powered by a 9V battery, sold separately, and the unit will emit an audible chirp to alert when the battery needs to be replaced.

    Operating Instructions:
    • Open the battery cover on the top of the unit and insert one (1) 9 volt battery in the compartment.
    • Attach leader cable (which will look like a phone cord) to the jack on the bottom of the alarm unit.
    • Place alarm box within range of the area in which you would like to setup the water sensing cable. Attach the adhesive tape on the rear of the alarm unit and attach to a dry, flat surface such as a wall.
    • Attach water sensing cable to the plug receiver on the end of the leader cable.
    • Place sensing cable in the area you would like to detect the water.
      Utilize the five c-clips provided to affix the leak detection cable to surface you would like to detect.

  • Specifications
    Manufacturer Honeywell
    Manufacturer Product No. RWD41/T
    UPC 085267615730
    Dimensions L 1.5in x W 9.5in x H 7.38in
    Weight 0.5 lbs
    Alarm Audible
    Cable Length 4 feet
    Expandable Yes, up to 250 feet
    Power Source 9V battery
    Low Battery Alert Yes
    Manufacturer Warranty 1 year
  • 1 Review

    Review of 20496 Review by KEN
    Review of 20496

    Excellent product. Easy to install.

    Posted on 2/2/2013

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Alarm base unit
    • 1x - 4ft water sensing cable
    • 1x - Adhesive to mount base unit
    • 5x - Adhesive c-clip to secure cable
    • 1x - Plug receiver
    • 1x - Owner's manual

Please wait...