HomeSeer HS-DS100+ Z-Wave Door / Window Sensor

HomeSeer HS-DS100+ Z-Wave Door / Window Sensor

Designed to Send Z-Wave Commands When Doors or Windows are Opened or Closed
  • Door / window sensor
  • Uses conventional AAA batteries for less battery changes
  • Small and Sleek design
  • Z-Wave Plus certified for easy inclusion and reliable communications

Item #: 12817 IN STOCK - SHIPS TODAY

$28.45

List Price: $29.95

Your Savings: $1.50

REWARDS: 28 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Operation

    HS-DS100+ is comprised of a sensor body and a magnet piece. The sensor body is (typically) installed on a door or window jamb. The magnet piece is (typically) installed on the door or window. When the door or window are closed, the magnet trips a switch inside the sensor body and a Z-Wave command is issued. When the door or window are opened, the switch is tripped again and another Z-Wave command is issued.

    Physical Installation

    The sensor body and magnet piece must be mounted to the door or window (vertically or horizontally) using the provided screws or double-stick tape (your choice). Leave a gap (no wider than 10mm) to allow the door or window to open and close easily with-out obstruction. If using screws, you’ll have to the mount the backing plates of the sensor body and magnet piec-es first. To do this, press the latch button on the sensor body and gently pry off the backing plate. Then, use a small slotted screwdriver to remove the backing plate from the magnet piece.

    Z-Wave Network Installation

    Door/Window Sensor can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliabil-ity of the network.

  • Specifications
    Manufacturer Homeseer
    Manufacturer Product No. HS-DS100PLUS
    UPC 610585164556
    Operating Temp Range 0ºC to 40ºC
    Certification Z-Wave Plus
    Requirements US Z-Wave network
    Z-Wave Frequency | Range 908 MHz (US) | Up To 300 Ft line of sight
    Power Supply Requires (2) AAA 1.5V Batteries
    Dimensions
    Sensor Body 3 x 1.1 x .75 inches
    Magnet Piece: 3 x .5 x .75 inches
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - DS100+ Z-Wave Door / Window Sensor
    • 1x - Magnet Piece
    • 1x - Double stick tape
    • 1x - Mounting screws
    • 2x - AAA Alkaline batteries
    • 1x - Manual

Please wait...