HomePro CR230 Amplified Coupler-Repeater

HomePro CR230 Amplified Coupler-Repeater

Resolve X10 Response Issues In Your Home


REWARDS: 122 points
  • Details
  • Specs
  • Reviews
  • What's Included

  • For systems with less demanding needs, this module amplifies X10 signals of 100mV or more to 5V across both phases of a 120/240 VAC split-single phase distribution system commonly found in a single-family home. The Amplified Coupler-Repeater will repeat both standard and extended X10 code sets. LEDs on unit show operation status. One LED shows that power is on and the unit is ready to repeat signals, the other will blink when it receives and sends X10 signals. Both lines are fuse protected and will mount into a standard three-gang electrical box.

  • Specifications

    Manufacturer Product No.:CR230
    Supply Voltage:120 VAC +/- 10% (Phase A to neutral)
    Fuses (field replaceable):Phase A: 5x20mm, 1.0A, 250V
    Phase B: 5x20mm, 500mA, 250V
    Signal Input:X-10 Powerline Carrier on any phase sensitive to 25 mV; Signal Carrying Conductor (SCC)
    Mechanical Connection Tri Barrier Terminal Block with Screw Clamp
    Wire Size Minimum:16 AWG
    Wire Strip Length:5/16"
    Operating Temperature:32º to 120ºF
    Operating Humidity:10% to 95% non-condensing

  • Reviews 1 - 10 of 11

    1. 1
    2. 2
    Review of 4820ac Review by JOHN
    Review of 4820ac

    So far it works great.

    Posted on 8/25/2013

    Review of 4820ac Review by STAN
    Review of 4820ac

    The HomePro CR230 FIXED all my erratic signal problems! Even trying to wire all the transmitters and receivers to the same phase didn't work. This did. Easy install too.

    Posted on 6/6/2013

    Review of 4820ac Review by John W
    Review of 4820ac

    This product seems to work like a champ. I installed it in about an hour and now my x10 devices work reliably. Only 2 minor comments regarding the instruction sheet 1 As long as you recommend using external circuit breakers, you should indicate what amp rating to use 2 it needs a 3 gang box for installation vs a 2 gang as indicated.

    Posted on 1/3/2013

    Review of 4820ac Review by Mark Williams
    Review of 4820ac

    Works for about 2 years then quits. Manufacturer dosen't give any support for out of warrenty parts. I have gone through 3 of these units in the last 6 years. 4820aac cr320

    Posted on 1/30/2012

    Review of 4820ac Review by JON
    Review of 4820ac

    X-10 still the most reasonably priced way to go if you want to automate lights and appliances in and around your home.
    Extremely happy with this product. This is the signal amplifier needed for large homes.

    Posted on 12/26/2011

    Review of 4820ac Review by WILLIAM
    Review of 4820ac

    Works perfectly! Solved every issue I was having with range, locations of devices, and interferrence.

    Posted on 12/16/2011

    Review of 4820ac Review by DAVID
    Review of 4820ac

    Always had problems with intermittent operation but once I installed the CR230 everything worked like a charm. 5 star rating as far as I am concerned

    Posted on 10/19/2011

    Review of 4820ac Review by DENNIS
    Review of 4820ac

    Not sure if was defective or not. It did not indicate that it was doing any receiving or repeating at all.

    Posted on 5/16/2011

    Review of 4820ac Review by ALAN
    Review of 4820ac

    We installed a phase bridge first to fix our loss of signal problem, that helped some, but it was kink of hit and miss. When we installed the repeater we no longer have any problem any where in the house controlling the lights. I think it is a great product.

    Thank You
    Alan Pedersen

    Posted on 1/20/2011

    Review of 4820ac Review by BAYARD
    Review of 4820ac

    Installed and doing well. welcome back remotes

    Posted on 7/26/2008

    Leave a Review

    Only registered users can write reviews. Please, log in or register

  • HomePro Amplified Coupler-Repeater
  • Mechanical Connection Tri Barrier Terminal Block with Screw Clamp

Please wait...