- Details
- Specs
- Reviews
- What's Included
-
If X10 transmitters in one part of your home seem to be unable to control X10 devices in another part of your home, this signal bridge will most likely solve the problem. Most homes have two-phase 220V power, which is split into two 110V "legs" within the house. This signal bridge installed at the breaker box provides a clear X10 path from one "leg" to the other.
Tip: If X10 signals can only go from one part of the house to the other when your 220V dryer is on, you need a signal bridge.
-
Specifications
Manufacturer: HomePro Manufacturer Product No.: CP000 Compatibility: X10 compatible
-
- Review of 4815ac Review by RON
-
Review of 4815ac
RON
Rating Did nothing for my problem, a waste of money....
Posted on 12/29/2013
- Review of 4815ac Review by STEPHEN
-
Review of 4815ac
STEPHEN
Rating Seems to be working ok signals are stronger then before.
Posted on 12/20/2013
- Review of 4815ac Review by JANUSZ
-
Review of 4815ac
JANUSZ
Rating Unfortunately it doesn't work.
My house is not big, I have just 5 rooms and signal bridge did not help me to control both phases.Posted on 9/10/2013
- Review of 4815ac Review by HAROLD
-
Review of 4815ac
HAROLD
Rating It did not work - a waste of time and money. Zero stars!
Posted on 8/23/2013
- Review of 4815ac Review by LORRIN
-
Review of 4815ac
LORRIN
Rating Bridges the 220 so x10 commands get to all devices.
Posted on 3/22/2013
- Review of 4815ac Review by JOHN
-
Review of 4815ac
JOHN
Rating UL Listed. Fills a 2 1/8" deep box. Solved my problem.
Posted on 1/12/2013
- Review of 4815ac Review by JOHN H
-
Review of 4815ac
JOHN H
Rating UL Listed. Fills a 2 1/8" deep box. Solved my problem.
Posted on 1/12/2013
- Review of 4815ac Review by JOHN
-
Review of 4815ac
JOHN
Rating Mounted 6" from circuit board. Works great. The only x10 product that is intermittent is an incandescent module which fails to shut down occasionally.
Posted on 12/25/2012
- Review of 4815ac Review by JOHN L
-
Review of 4815ac
JOHN L
Rating Mounted 6" from circuit board. Works great. The only x10 product that is intermittent is an incandescent module which fails to shut down occasionally.
Posted on 12/25/2012
- Review of 4815ac Review by KIRK
-
Review of 4815ac
KIRK
Rating HomePro CP000 X10 signal bridge didn't bridge signals between my A and B phases. I RMA'ed the CP000 and ordered the Leviton HCA02-10E 2-Phase X10 Coupler-Repeater. That works like a champ! There 'may' be too much signal noise in my house for the CP000 to work. Smarthome.com took care of my return promptly though.
Posted on 12/5/2012
Leave a Review
-
- 1x - X10 Signal Bridge - HomePro CP000
- 1x - X10 Signal Bridge - HomePro CP000