GE Security 805173NXT Simon XT SAW Package A5 w/o X10

GE Security 805173NXT Simon XT SAW Package A5 w/o X10

Reliable, Cost-Effective Security System
  • Complete system including control, cables, 4 sensors, and more
  • 40 Zones
  • Uses GE's proven SAW wireless technology
  • Super-loud piezo siren
  • Microphone for emergency two-way communication with monitoring station personnel
  • Backup power supply keeps the system operational during power failures



List Price: $576.00

Your Savings: $80.03

REWARDS: 495 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • Simon XT is a cost-effective security system that offers up to 40 zones of burglary and fire protection, and which complies with SIA False Alarm Standards. With a built-in display touchpad and a status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums.

    The Simon XT panel comes standard with 40 wireless zones, or it can be set up with 38 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only). The built-in radio receiver works with both crystal and SAW Learn Mode sensors.

    Simon XT supports off-premises telephone control to arm and disarm the system, check system status, activate no-entry delay, or activate the latchkey feature. With latchkey capabilities, the panel can be programmed to notify customers if the system has not been disarmed at a scheduled time.

    Simon XT supports convenient system operation from anywhere within the premises with the use of wireless touchpads. Choose from the Remote Handheld Touchpad, two-, four-, or five-button crystal or SAW Keychain Touchpads (keyfobs), or two-button ELM Keychain Touchpad. ELM (encrypted Learn Mode) technology secures every keychain touchpad transmission. When powered by the optional line carrier transformer, adding X10-based modules lets customers control lights, appliances, and other devices.

    Simon XT can send messages to a central monitoring station using SIA or Contact ID (CID) formats. The panel can also report alarms to another land-line phone location or cell phone using Voice Event Notification. Built-in two-way voice capability with VOX (voice-activated switching) provides additional security and emergency contact with the control monitoring station.

    • 40 wireless zones - two can be hardwired (normally-closed loop only)
    • Built-in PSTN 2-way voice capability (over GSM with optional module)
    • Supports both crystal and SAW LearnMode sensors
    • Supports repeaters
    • Supports 2-way RF products (version-specific)
    • Indoor and outdoor motion sensors
    • Chime feature for monitoring door, window, or motion activity
    • 1 master access code and 8 programmable user access codes of 3 to 6 digits
    • SIA or CID central station reporting formats and Voice Event Notification reporting via PSTN (native) and/or optional GSM and IP modules
    • Programmable No Activity and No Usage report features
    • Meets SIA False Alarm Standards
    • 100-event buffer with time-and-date stamp
    • Panel voice and beeps that can be disabled
    • Program panel with built-in touchpad or Enterprise Downloader software v3.4 or later
    • Firmware flash upgrades can be done remotely
    • Expansion options
    • Internet-based interactivity (with third-party providers)
    • Support for on-premises remote control with optional talking touchpad accessory
    Expansion options
    • Internet-based interactivity (with third-party providers)
    • Support for on-premises remote control with optional talking touchpad accessory

  • Electrical
    • Required transformer: Class II, 9 VAC, 3.34A, 60 Hz (60-899, 60-899-CN in Canada)
    • Fuse: Non-replaceable transformer fuse
    • Backup batteries: 6 VDC, 1.2 Ah lead acid (60-914)
    • Backup time: 24 hours (fully charged)
    • Battery test: 10 seconds under load every 4 hours

    • Radio receiver
    • Type: SAW-controlled superheterodyne
    • Frequency: 319.5 MHz/ Bandwidth 350 kHz
    • Sensitivity: -110 dBm nominal
    • Nom. range without GSM module present: 1000-ft. open-air receiving range
    • Nom. range with GSM module present: approx. 500-ft. open-air receiving range

    • Telephone/modem
    • Dialing: DTMF or pulse
    • Modem: Modified Bell 103 (110 or 300 bps)
    • Telephone interface: Line seizure relay

    • Inputs/outputs
    • Total input zones: 40 or 38 wireless and 2 hardwire (normally-closed loop only)
    • Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
    • Siren output: 1 Hardwire Interior Siren (5.1 to 9 VDC)

    • Digitized voice
    • Digitization type: Continuous Variable Slope Delta (CVSD) Modulation
    • Playback rate: 88,200 bits/second

    • Environmental
    • Operating temperature: 32 to 122° F (0 to 49° C)
    • Relative humidity: 90% max., noncondensing

    • Physical
    • Color: White
    • Dimensions (LxWxD): 5.7 in. x 7.05 in. x 2.1 in. (144 mm x 179 mm x 53 mm)
    • Weight, without battery: 1.0 lb. (454 g)
    • Installation: Wall mount
    • Construction, chassis: ABS

    • Regulatory
    • FCC: Part 15, Part 68
    • UL: 985, 1023, 1635/ULC Listing ORDC102319- 74,ULC-S545-M89
    • CSFM: California State Fire Marshall
    • CP01
  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • Control
    • Battery
    • Class II Transformer
    • Phone Cord
    • RJ31X Jack
    • Three (3) SAW Door/Window Sensors
    • SAW Pet Immune PIR Motion Sensor
    • 4-Button SAW Keychain Touchpad

Please wait...