GE 57884 Motion Sensing Single Pole In-Wall Switch, Ivory

Motion-Activated In-Wall Control for Lighting and Appliances
  • 150-degree motion detection pattern
  • Adjust the On-time anywhere between 5 - 20 minutes
  • Sensitivity of the Photocell is adjustable
  • Works with both fluorescent "rapid start" and incandescent
  • Use with lights or appliances such as fans or other motors
  • Fits standard "decora-style" wall plates (1x - Included)



List Price: $24.99

Your Savings: $8.84

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • Intended for indoor use only, this single pole, in-wall, motion activated switch detects movement or motion and automatically activates lighting or appliances for a specified amount of time. Popular, "decora-style" design matches almost any home decor. A built-in photocell is used to prevent the switch from activating lighting when there is already enough present, such as ambient light coming into a room through a window. General Electrics 57884 has an adjustable sensitivity and is extremely reliable. It has one of the largest detection ranges possible for this design. The motion detector is much more sensitive to motion moving across the front of the sensor or perpendicular, than motion moving toward the sensor. This motion detector senses heat in motion and very fast temperature changes from a visible heat source. In order to avoid false triggers, do not install this switch facing a area containing air conditioners, heaters, and other sources of heat or cold.

    When using this switch in a new construction, choose a location where the motion sensor has a clear view of the area you wish to monitor. When using this device in a retrofit application, simply replace your existing switch with the new GE Motion Activated Switch. Controlling your lighting or appliances so that they only activate when needed creates an incredible amount of safety by illuminating darkrooms or running appliances hands-free. Automating your in-home lighting and appliances control, is a money saving home improvement you will not regret. You will notice that these switches will use much less energy by knowing when it is needed and by preventing lights and appliances from being on too long.

    This product is also available in white.

  • Specifications
    Manufacturer GE (General Electric)
    Manufacturer Product No. 57884
    UPC 043180503350
    Voltage 120VAC
    Fluorescent Load (2 tube minimum) 30 Watt minimum, 400 Watt maximum Rapid Start
    Motor Load 1/8 HP maximum
    Incandescent 500-Watt maximum
    On-Time: Adjustable approximately 5 - 20 minutes
    Photocell Sensor From full daylight to less than 1 FC
    Coverage up to 15 ft. at 150 - degrees, up to 30 ft. in front of the sensor

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - 57884 Motion Sensing Single Pole In-Wall Switch, Ivory
    • 1x - Cover Plate, Ivory
    • 3x - Wire Connectors
    • 2x - Large Screws
    • 2x - Small Screws
    • 1x - Installation Guide

Please wait...