Refurbished LampLinc - Insteon Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin
Share Share Share Share Share

Factory Refurbished Insteon Remote Control Plug-In Lamp Dimmer Module, 2-Pin

Fully Redesigned Lamp Dimmer for Enhanced Insteon Remote Control
  • Control a light remotely, turning it on and off and adjusting brightness levels
  • Full local control (Dim/Bright, On/Off)
  • Works with Amazon Alexa for voice control (Insteon Hub required; Alexa device and Insteon Hub each sold separately)
  • Incorporate a lamp into multiple lighting design scenes in minutes
  • This product is an Insteon Dual-Band device
  • This product is refurbished and sold as-is - see note below for details



List Price: $49.99

Your Savings: $25.00

REWARDS: 24 points
  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • This refurbished product is tested to work like new, with limited to no signs of wear. The refurbishing process includes inspection, functionality testing, and repackaging. May not have original packaging. Limited 30 Day Warranty – all sales are final. Only exchanges will be accepted for products found to be defective.

    The Insteon LampLinc Dimmer (Dual-Band) is a full-featured plug-in lamp dimmer that can be remotely controlled by a Mini Remote, KeypadLinc, or any other Insteon controller. This simple-to-use plug-in dimmer has advanced features like an adjustable ramp rate that slowly brings the lamp on, a preset dim level that stores your preferred choice of 32 brightness levels when turning the lamp on initially, as well as local control, so you can still use the lamp's built-in switch to turn the light on and off. This LampLinc is made to be plugged into any wall outlet. This dimmer can control incandescent loads up to 300 watts.

    Easy To Install
    The LampLinc is easy to plug-in and set up that you'll want to add LampLinc dimmers to all of your lamps. Just unplug the lamp, plug the lamp into the bottom outlet of the dimmer, and plug in the dimmer where the lamp was plugged in. Link the dimmer to an Insteon controller using the Plug & Tap programming method, and you'll be able to turn the lamp on and off, brighten and dim.

    Learn more about Insteon .

    Brightness Levels
    You can adjust the brightness level of the controlled lamp by pressing and holding the on or off button of an Insteon controller. The brightness level can also be adjusted on the module via the Up/Down buttons. Adjusting brightness levels is especially helpful when you want to create a theatrical experience when watching your favorite movie. Use a Mini Remote or pair your universal remote control with an IRLinc, and you won't even have to leave the comfort of your couch to dim the light. When you turn on the LampLinc dimmer, it automatically comes on to full brightness. Setting the preset on level will make the dimmer stop at your preferred choice of 32 brightness levels. With software you can control brightness levels in one percent increments for ultimate flexibility. This is a great feature for your bedroom to set the mood.

    Adjustable Ramp Rate
    Adjust the speed at which the controlled light turns on or off, also known as the ramp rate. For example, you may want the lamp in the kids' room to turn on instantly so you can see where you're walking. Alternatively, you may want the lamp in the master bedroom to ramp up in a soft, gentle fashion so that you're not blinded when you wake up in the morning. The ramp rate is adjustable between 0.1 seconds and 9 seconds if programmed locally; this can be done by using the convenient Up/Down buttons located on the module. The ramp rate can extend up to 8 minutes (for a simulated sunrise or sunset) if programmed remotely. This is a great addition to your morning alarm, slowly turning the light on to help you wake up. If you have programmed a slow ramp rate and want to make the lamp come on instantly, simply double tap the controller's on button. To turn the light off quickly, double tap the controller's off button.

    Red/Green Status LED
    The Status LED is used for setup programming. It is now located at the top of the module for easier viewing when programming or troubleshooting.

    Create Multi-Way Circuits
    Want to be able to synchronize a wall switch with your lamp so that when your recessed lights are controlled at the switch, your floor lamp follows along? You can do it with Insteon . Simply link your LampLinc with an Insteon-compatible wall switch and in seconds you're done.

    Scene Lighting
    Scenes allow you to set unique lighting levels across multiple lights and trigger them with a single command. Because the LampLinc can be a member of more than 400 scenes (i.e. "Movie Time," "Party," "Romance," etc.), you'll be able to launch various lighting scenarios with a single button press on any Insteon controller. These are elegant features usually found only in systems costing tens of thousands of dollars and requiring extensive rewiring of your home. All scene member lights can ramp to your independently desired brightness levels at your chosen ramp rate(s), so one set of lights can dim slowly while another set turns off instantly, all controlled with one command from one button.

    Non-Volatile Memory
    All LampLinc Dimmer settings are stored in non-volatile memory and are not lost during power failures. Additionally, in the event of a power loss, the LampLinc Dimmer's lamp will return to its last brightness level when power is restored.

  • Specifications
    Manufacturer Insteon
    Manufacturer Product No. 2457D2R - LampLinc
    Insteon Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin
    UPC 813922010183
    Patent No. Protected under US and Foreign Patents (see
    Color White
    Warranty 2 Years
    FCC ID SBP2457D2A
    Industry Canada 5202A-2457D2A
    Status LED Red and Green
    On-Levels 32
    Preset On Level Yes - levels from 1% to 100%
    Ramp Rate (full-ON to full-OFF 0.125 to 9 seconds if programmed locally,
    0.125 seconds to 8 minutes if programmed remotely via software
    Local Control Insteon only
    Combo Mode Message Order Insteon , Insteon cleanup
    Setup Memory Non-volatile EEPROM
    Load Sensing Yes
    Insteon Features
    Insteon Addresses 1 hard-coded out of 16,777,216 possible
    Insteon Links 417
    Insteon Powerline Frequency 131.65 KHz
    Insteon Minimum Transmit Level 3.2 Vpp into 5 Ohms
    Insteon Minimum Receive Level 10 mVpp nominal
    Insteon Messages Repeated Yes
    Radio Frequency 915MHz
    Ramp Rates (full-ON to full-OFF) 0.125 to 9 seconds if programmed locally,
    0.125 seconds to 8 minutes if programmed remotely via software
    Operating Conditions Indoors, 32 to 104° F,
    up to 85% relative humidity
    Dimensions 3.2" H x 2.05" W x 1.05" D
    Weight 3.3oz
    Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
    Power Plug 2-pin polarized
    Controlled Outlet 2-pin polarized
    Pass-through Outlet No
    Load Types Plug-in incandescent lighting devices
    Load Min. 5W, Max. 300 Watts
    Power Consumption 0.84 Watts
    Certification Safety tested for use in USA and Canada (ETL #3193579)
  • 10 Reviews

    almost as good as new Review by Mike O
    almost as good as new

    Only problems I've had with the refurbs is not having them automatically link but I've been able to pair them by address with appropriate software. Never have issues linking with 2413U PLM since it is dual band.

    Posted on 12/2/2015

    Review of 2457d2r Review by WILLIAM
    Review of 2457d2r

    Fast Shipments!

    Posted on 8/9/2014

    Review of 2457d2r Review by ERAN
    Review of 2457d2r

    works well once setup, however there are a few outlets in my home where it will simply not operate or link from. I even tried linking it elsewhere and then plugging it to the outlet in question - no go.

    other then that - works well.

    Posted on 8/6/2014

    Review of 2457d2r Review by DUANE
    Review of 2457d2r

    This product works well, right out of the box. Unfortunately I think your prices are way too high, when, and if, I can find a similar product at a lower price, I will switch over.

    Posted on 6/27/2014

    Review of 2457d2r Review by GARY
    Review of 2457d2r

    Works great with LED lighting from CREE

    Posted on 6/25/2014

    Review of 2457d2r Review by Simon
    Review of 2457d2r

    I bought 6 of these refurbished, and two of them failed totally within a few weeks, but outside of the 30 day warranty. In future I'll stick to paying the full price for properly warranted ones. I've been an extensive insteon user in two different homes over the past 8 years. While I love the convenience and potential, too many of the units start acting up too soon for me to really recommend the overall solution.

    Posted on 5/25/2014

    Review of 2457d2r Review by BYRON
    Review of 2457d2r

    Using this device to control power supplies for IP Cameras. Works great!

    Posted on 4/17/2014

    Review of 2457d2r Review by DANIEL
    Review of 2457d2r

    Bought 2 of these and had absolutely no problems setting them up. I've had them a month now and I still haven't had a single issue. Excellent product!!

    Posted on 4/10/2014

    Review of 2457d2r Review by BRAD
    Review of 2457d2r

    Great product, easy to install, easy to use.

    Posted on 1/28/2014

    Review of 2457d2r Review by BRETT
    Review of 2457d2r

    Product worked perfectly and joined my Insteon network without any issues

    Posted on 1/4/2014

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Refurbished LampLinc - Insteon Plug-In Lamp Dimmer Module (Dual-Band), 2-Pin
    • 1x - User Guide

Please wait...