Factory Refurbished Insteon I/O Linc
Share Share Share Share Share

Factory Refurbished Insteon I/O Linc Contact Closure Interface

Expand your Insteon Network to monitor and control low voltage and contact closure devices
  • Monitor and control pool valves, electric door strikes, garage doors and more using your Insteon network
  • 4 output relay modes allow you to control many different types of devices
  • Control Insteon lights and appliances using standard sensors
  • Contains 1 sensor input and 1 output relay (NO/NC)
  • For control from an Insteon Mini Remote, you will need a Range Extender or other dual-band Insteon devices*
  • Can be used with an Insteon Hub however the included IOLinc module communicates via powerline only, so you may need a Range Extender or other dual-band Insteon devices*
  • Award-winning Insteon technology provides superior performance and reliability
  • This product is refurbished and sold as-is - see note below for details
  • This item is a retail packaged version of the I/O Linc (2450). Apart from packaging it is functionally identical.
* The included Insteon IOLinc module communicates over powerline only, which may cause issues if you are trying to remotely operate Insteon devices on a different electrical phase (circuit) or from a Mini Remote. We recommended adding a Range Extender on the same phase to bridge the IOLinc module with Insteon RF-only or Dual-band devices.

Item #: 2822-292R PRODUCT IS UNAVAILABLE

  • Details
  • Specs
  • Reviews
  • Manuals
  • What's Included
  • This refurbished product is tested to work like new, with limited to no signs of wear. The refurbishing process includes inspection, functionality testing, and repackaging. May not have original packaging. Limited 30 Day Warranty – all sales are final. Only exchanges will be accepted for products found to be defective.

    The latest Insteon plug-in module, I/O Linc, lets you monitor and control any low voltage devices such as alarm sensors, electric door strikes, and contact closures as part of your Insteon home automation network. With one dry-contact sensor input you can control many Insteon devices throughout the house. Plus, use the built-in single-pole double-throw (SPDT) switch, connect any low voltage-powered device for continuous or momentary operation. Create your own remote-control door lock using an electric door strike and power supply or use a security sensor turn Insteon controlled lights on or off.

    Required Accessories
    Sensor wire: 16 - 28 gauge wire fits, but 20 - 22 gauge recommended

    I/O Linc's flexible output relay can control many different types of low voltage devices, from pool valves to electric door strikes to garage doors due to its different relay modes. When controlling devices like pool valves, you will want the ability to leave it on for an extended period of time, giving it plenty of time to fill the pool. As it approaches the desired water level, then you can remotely turn it off. For devices like electric door strikes, set I/O Linc's output relay to momentary, allowing you open the front gate using a RemoteLinc or any other Insteon controller. A third version of I/O Linc's momentary mode allows you to remotely press your garage door button with an Insteon On command, but only if your garage is currently closed. This allows you to open your garage with On command and close it with an Off command. Because I/O Linc uses a garage door sensor to know whether the door is open or closed, it only controls the garage when it needs to.

    Controlling Two Separate Loads
    With the addition of a DPDT Relay Board, the I/O Linc is capable of switching two separate loads on and off together. In this configuration, the I/O Linc could control two different loads of varying voltages (i.e. one high voltage and one low voltage load) or two higher current loads (up to 7A @30VDC each).


  • Specifications
    Manufacturer Insteon
    Manufacturer Product No. 2450R
    UPC 689076403542
    Patent No. Protected under US and Foreign Patents (see Insteon.com)
    Warranty 2 Years
    Operation
    Status LED White (Bright when relay closed, dim when relay open)
    Sensor Status LED Green (On when sensor closed, Off when sensor open)
    Set Button Toggles output relay On/Off
    Also used for setup
    Momentary Duration(Locally Adujtable) 2 Seconds to 30 Minutes
    Software Adjustable
    .2 Seconds - 105 minutes
    Operation Modes Insteon
    Setup Memory Non-volatile EEPROM
    Multi-Way Circuit Support Yes
    Insteon Features
    Insteon Addresses 1 hard-coded out of 16,777,216 possible
    Insteon Links 417
    Insteon Powerline Frequency 131.65 KHz
    Insteon Minimum Transmit Level 3.2 Vpp into 5 Ohms
    Insteon Minimum Receive Level 10mV
    Insteon Messages Repeated Yes
    Mechanical
    I/O Terminals 5V (10mA)
    GND
    Sense
    N/C
    N/O
    Common (28-16 gauge wire)
    Input Jack 1/8" mini jack input (GND, Sense)
    Input Type Contact closure only
    Output Relay Capacity 5A @ 30 Volts (AC or DC)
    Operating Environment Indoors
    Operating Humidity Range Up to 85% relative humidity
    Operating Temperature Range 32° to 104°
    Dimensions(HxWxD) 4.5" x 2.5" x 1.5"
    Weight 4.6 oz
    Electrical
    Supply Voltage 120 Volts AC +/- 10%
    60 Hertz
    Single phase
    Sensor Input 1/8" mini jack input (GND, Sense)
    Power Plug 3-pin grounded
    Pass-through Outlet Uncontrolled 3-prong (with ground), 120V, 15A
    Power Consumption 0.93 Watts
    Certification Safety tested for use in USA and Canada
  • 2 Reviews

    Works like new Review by kdjerred
    Works like new
    Rating

    It came in an original box. Looks like new and appears to work with no problems. I have purchased 3 over the past few weeks. I am using them as controllers for refrigerator and freezer failure sensors. I recommend them as a cost saving way to expand your Insteon network. In the past couple of years I have used the I/O link for two fire place controllers when paired with Insteon portable thermostats and as garage door controllers. I have never had a problem with any of them.

    Posted on 6/11/2017

    Works Great Review by Rance
    Works Great
    Rating

    Installed range extender same time I installed garage door controller. Everything works great. Installed easily on my hub, easy to access & operate.

    Posted on 3/18/2017

    Leave a Review

    Only registered users can write reviews. Please, log in or register

    • 1x - Insteon I/O Linc
    • 1x - Quick Start Guide
    • 1x - 1.5mm flathead screwdriver

Please wait...