Enforcer Quad Photobeam Detector, 165 Foot Range

Enforcer Quad Photobeam Detector, 165 Foot Range

Protect your Property from Criminals and Vandals with a Perimeter-style Security Sensor
  • Quad (four) infrared beams provide reliable perimeter security
  • Weatherproof design ideal for outdoor applications - with an outdoor range up to 165 feet
  • Quick, easy installation with built-in laser beam and audible alignment system
  • Adjustable frequency and interruption time
  • Built-in Normally Open and Normally Closed relay outputs



List Price: $312.51

Your Savings: $93.27

REWARDS: 219 points
  • Details
  • Specs
  • Reviews
  • What's Included
  • An ultra-reliable security system means more than just monitoring possible entry ways into your home or business, it also means monitoring the perimeter of your property. The Enforcer Quad Photobeam Detector uses four infrared beams of light to create a detection barrier up to 165 feet in length when used outdoor (up to 330 feet indoor). Ideal for monitoring your property line, this product features weatherproof construction, sunlight-filtering, anti-frost system and a built-in heater, making this product the perfect outdoor solution built to withstand harsh environmental conditions. The built-in laser beam alignment system and voltage testing points, decrease installation time while providing accurate, reliable positioning and extended range of the detector. There is even an LED alignment strength indicator to assist you with the setup. The lensed optics reinforce beam strength and provide excellent immunity to false alarms due to falling leaves, birds, inclement weather, etc., and the interruption time is adjustable for nearly all situations. It also offers normally closed/normally open alarm outputs in addition to a normally closed tamper circuit that can be used to communicate with your security system. Lastly, a selectable 4-channel beam frequency allows the sensor beam frequency to be set at different levels to avoid interference from other photobeam sensors nearby.

    Adjusting the Delay Time
    The delay time adjustment knob sets how long the beam can be interrupted before triggering the alarm. A short delay time (high sensitivity) is suitable for catching fast moving intruders, but more susceptible to false alarms. A long delay time (low sensitivity) reduces false alarms, but fast moving intruders may not trigger the sensor.

    Running the Wires
    Run a cable from the alarm control panel to the photobeam sensor. If burying the cable is required, make sure to use electrical conduit. 22-Gauge, 20-Guage, 18-Guage, or 17-Guage shielded cable is strongly suggested.

    Weatherproof Construction
    Ingress Protection (IP) is rating for electronic products as it relates to the amount of sealing they have against the entry of solid and liquid objects. Complete details of this standard can be obtained from the IEC. This uniform and widely acknowledged classification system provides equipment designers and specifying agents with a convenient and reliable method of comparing relative levels of sealing between competing (connector) products. In its simplest form, the classification system consists of the letters "IP" followed by two separate digits, which denote increasingly greater sealing from solid objects and from water.

    The Enforcer Quad Photobeam Detector has a rating of IP55. The first number '5' refers to the degree of protection against access to hazardous parts and ingress of solid objects. 5 is the next to the highest rating, "Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact". The second number '5' refers to the degree of protection against the ingress of water. 5 is one of the highest levels of protection, "Water projected by a nozzle against enclosure from any direction shall have no harmful effects."

  • Specifications

    Manufacturer: SECO-LARM
    Manufacturer Product No.: E-964-Q165Q
    Maximum Range: Outdoor: 165' (50m)
    Indoor: 330' (100m)
    Current: Tx and Rx: 110mA
    Tx and RX and Heaters: 260mA
    Input Voltage: 12 ~ 24 VAC/VDC (non-polarity)
    Delay Time: 50msec ~ 700msec (variable)
    Detection Method: All four (4) beams simultaneously broken
    Selectable Beam Frequencies: Four (4) channels
    Alarm Output: Form "C" relay, COM/N.O./N.C,. 1A @125VAC/24VDC
    Tamper Output (Tx & Rx): NC switch, 1A @ 120VAC
    Environmental Output: Selectable N.O. or N.C. [email protected]/24VDC
    Beam-Strength Indicator: Five (5) LEDs indicate signal strength from high to low
    Signal LED (Rx): Red LED ON - beam is broken or Tx and Rx out of alignment
    Power LED (Tx & Rx): Green LED - illuminated when power is on
    Laser Wavelength: 650nm
    Laser Output Power: < or = to 5mW
    Alignment Angle: Horizontal: +/- 90°
    Vertical: +/-15°
    Operating Temperature: -13° F ~ 131° F (-25° C ~ 55° C)
    Weight: 5.7 lbs. (2.6kg)
    Ingress Protection: IP55
    Case: PC Resin
    Dimensions: 15 1/4" x 4 7/16" x 4 11/32" (387mm x 113mm x 110mm)
    Certifications: CE, RoHS
    Warranty: Manufacturer three (3) year

  • Leave a Review

    Only registered users can write reviews. Please, log in or register

    • Enforcer Quad Photobeam Detector (Transmitter)
    • Enforcer Quad Photobeam Detector (Receiver)
    • Owner's manual

Please wait...